Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Package. This unbelievable package includes not just the T-REX 600N DFC Package, but likewise a pair of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and naturally the 3GX flybarless system. This incredibly combo package supplies you with an amazing helicopter package and a similarly impressive electronic devices package all in the very same box.

T-REX 600N DFC Features: Equipped with the DFC flybarless head assembly, with extremely low CG design to lessen wind resistance, supplying a more direct and accurate flight control action and higher top speed.
Dual 3K carbon plate side frame design for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary equipment hub to guarantee stable rotation, and remove jamming of one method bearing.
Revamped stainless steel tail drive equipment center install, for more accurate tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal adapters, resulting in improved rudder control precision.
Revamped torque tube front and rear drive equipment set, uses highest spec and superior anti-wear product to increase the general strength and durability. Efficiently lessen equipment striping and crash damage.
High quality tail transmission design, combined with dual point installed tail pitch control assembly to lessen slop and boost rudder control precision.
Utilizes high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High efficiency tail shaft drive design.
Highly efficient lightened engine cooling fan, reducing engine load and enhancing cooling efficiency.
Big size clutch system with special installation method for great balance, very little vibration, and efficient power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder action and exceptional tail locking ability.
Unique H shaped cross section mounting platform for easy electronic mounting and security.
Big capability 440CC fuel tank for up to 10 minutes of severe 3D flights.
Starting and clutch assistance point uses 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install and removal.
Created with concepts from big helicopter competitors, for the very best fixed and dynamic flight efficiency.

3GX Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will create an immediate impact on any lovers.
The 3GX is currently the tiniest and lightest flybarless system on the market and features two ports to straight connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions using the computer setup software directs the user through an action by action setup procedure, permitting fast setups without leaving out any steps.
With the soon to be released Bluetooth connection package, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, allowing pilots to attain the most optimum setup for their helicopter without the uncertainty.
Three levels of flight mode are available to supply the ideal feel for newbie and advanced pilots.
Custom criteria have been established to allow pilots to tweak numerous swashplate and rudder settings and a settings export function enables custom-made settings to be shared amongst friends.
The 3GX features the highest spec gyroscope sensing units, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensor drastically enhances swashplate and rudder correction precision and will be felt when hovering, as well as during aerobatic regimens.
Appropriate for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant attributes appear even when installed with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a remarkable improvement in stability that equals a flybarred helicopter, while supplying explosive dexterity.
With a built in pirouette settlement function, the 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
Rudder control resembles the high end GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder action attributes, allowing constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all ability levels to experience the ideal integration between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses an overall of 10 sensing units ensuring positioning of the helicopter with superior accuracy and supplying the supreme option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Drive Gear: 180T

Drive Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Package
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Guv Sensor


(1) B6T 2-in-1 Voltage Regulator

Needed To Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel