Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Kit. This extraordinary plan includes not just the T-REX 600N DFC Kit, however also a pair of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and of course the 3GX flybarless system. This extremely combo set offers you with an amazing helicopter set and a similarly impressive electronics plan all in the very same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with incredibly low CG style to minimize wind resistance, providing a more direct and precise flight control reaction and higher top speed.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is contributed to the top of the main gear hub to ensure steady rotation, and get rid of jamming of one way bearing.
Revamped stainless-steel tail drive gear center install, for more precise tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal adapters, resulting in enhanced rudder control accuracy.
Revamped torque tube front and rear drive gear set, makes use of highest spec and superior anti-wear product to increase the general strength and durability. Effectively minimize gear striping and crash damage.
High quality tail transmission style, integrated with double point installed tail pitch control assembly to minimize slop and boost rudder control accuracy.
Utilizes high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High performance tail shaft drive style.
Highly effective lightened engine cooling fan, reducing engine load and enhancing cooling performance.
Large size clutch system with special setup method for great balance, minimal vibration, and efficient power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking ability.
Distinct H shaped cross section mounting platform for simple electronic mounting and protection.
Large capacity 440CC fuel tank for up to 10 minutes of severe 3D flights.
Beginning and clutch assistance point makes use of 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of set up and elimination.
Designed with ideas from big helicopter competitors, for the very best fixed and vibrant flight efficiency.

3GX Characteristics:

Revamped 3GX represents the next generation of multi function flybarless systems. The dramatically enhanced efficiency will create an instant influence on any lovers.
The 3GX is presently the smallest and lightest flybarless system on the market and features 2 ports to straight connect Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions using the computer system setup software application directs the user through an action by step setup process, permitting quick setups without omitting any actions.
With the quickly to be released Bluetooth connection set, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to accomplish the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to supply the ideal feel for newbie and advanced pilots.
Customized specifications have actually been established to permit pilots to fine tune numerous swashplate and rudder settings and a settings export feature permits customized settings to be shared among good friends.
The 3GX features the highest spec gyroscope sensing units, enabling it to be used in the harshest conditions. The double axis plus rudder sensor dramatically improves swashplate and rudder correction accuracy and will be felt when hovering, as well as during aerobatic routines.
Appropriate for 200 to 800 class helicopters, radiance engine or electric powered.
The vibration resistant qualities are evident even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The result is a dramatic enhancement in stability that matches a flybarred helicopter, while providing explosive agility.
With a built in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily performed with accuracy.
Rudder control is similar to the high end GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder reaction qualities, enabling constant rudder feel even under high speed conditions. This exceptional control feel will permit pilots of all ability levels to experience the ideal integration in between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensing units ensuring positioning of the helicopter with superior accuracy and providing the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Guv Sensor


(1) B6T 2-in-1 Voltage Regulator

Needed To Total: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel