Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Package. This amazing plan includes not only the T-REX 600N DFC Package, however also a set of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This very combo package offers you with an amazing helicopter package and a similarly excellent electronics plan all in the exact same box.

T-REX 600N DFC Features: Equipped with the DFC flybarless head assembly, with incredibly low CG design to reduce wind resistance, providing a more direct and precise flight control response and greater top speed.
Double 3K carbon plate side frame design for ease of upkeep and resistance to torque induced flex.
Extra radial bearing is contributed to the top of the main equipment hub to guarantee stable rotation, and remove jamming of one way bearing.
Revamped stainless steel tail drive equipment center install, for more precise tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal adapters, leading to enhanced rudder control precision.
Revamped torque tube front and rear drive equipment set, makes use of greatest specification and exceptional anti-wear material to increase the total strength and durability. Effectively reduce equipment striping and crash damage.
High quality tail transmission design, combined with double point installed tail pitch control assembly to reduce slop and increase rudder control precision.
Uses high effective tail drive system.
High speed ranked thrust bearing in tail blade grips.
High performance tail shaft drive design.
Extremely effective lightened engine cooling fan, minimizing engine load and enhancing cooling performance.
Big diameter clutch system with distinct installation method for good balance, very little vibration, and reliable power transfer.
Forward installed rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder response and excellent tail locking ability.
Special H formed sample installing platform for simple electronic installing and protection.
Big capacity 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
Beginning and clutch assistance point makes use of 10mm one way bearing.
All set to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install and elimination.
Created with ideas from big helicopter competitions, for the very best static and dynamic flight efficiency.

3GX Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The dramatically enhanced efficiency will create an immediate impact on any lovers.
The 3GX is presently the smallest and lightest flybarless system on the market and includes two ports to directly connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup simply in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions utilizing the computer system setup software directs the user through an action by step setup procedure, allowing for fast setups without omitting any actions.
With the quickly to be launched Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, minimizing electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to achieve the most optimal setup for their helicopter without the guesswork.
Three levels of flight mode are available to supply the perfect feel for newbie and advanced pilots.
Custom-made parameters have been established to enable pilots to fine tune numerous swashplate and rudder settings and a settings export feature enables custom-made settings to be shared among buddies.
The 3GX includes the greatest spec gyroscope sensors, enabling it to be utilized in the harshest conditions. The double axis plus rudder sensor dramatically enhances swashplate and rudder correction precision and will be felt when hovering, along with throughout aerobatic routines.
Suitable for 200 to 800 class helicopters, glow engine or electric powered.
The vibration resistant qualities appear even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The result is a dramatic enhancement in stability that matches a flybarred helicopter, while providing explosive dexterity.
With an integrated in pirouette payment function, the 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
Rudder control is similar to the high-end GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder response qualities, enabling constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the perfect combination between the 3GX and the helicopter.
Extra peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensors making sure positioning of the helicopter with exceptional accuracy and providing the supreme option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Package
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Complete: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel