Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Set. This unbelievable bundle consists of not only the T-REX 600N DFC Set, however also a pair of 600 3G Carbon Fiber blades, a guv sensing unit, a 2-1 voltage regulator, three DS615 basic servos, one DS655 specialized servo, and naturally the 3GX flybarless system. This extremely combo set supplies you with an unbelievable helicopter set and an equally excellent electronics bundle all in the same box.

T-REX 600N DFC Features: Equipped with the DFC flybarless head assembly, with very low CG design to minimize wind resistance, offering a more direct and accurate flight control action and greater leading speed.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
Extra radial bearing is contributed to the top of the primary equipment center to guarantee steady rotation, and get rid of jamming of one way bearing.
Redesigned stainless steel tail drive equipment center mount, for more accurate tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal ports, leading to improved rudder control precision.
Redesigned torque tube front and rear drive equipment set, makes use of highest spec and remarkable anti-wear product to increase the total strength and resilience. Successfully minimize equipment striping and crash damage.
High quality tail gearbox design, combined with dual point mounted tail pitch control assembly to minimize slop and boost rudder control precision.
Uses high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High effectiveness tail shaft drive design.
Highly efficient lightened engine cooling fan, lowering engine load and enhancing cooling effectiveness.
Big diameter clutch system with special installation technique for great balance, minimal vibration, and efficient power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder action and outstanding tail locking ability.
Special H shaped random sample installing platform for easy electronic installing and defense.
Big capacity 440CC fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch support point makes use of 10mm one way bearing.
Prepared to fly dry weight is only 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install and elimination.
Designed with principles from big helicopter competitions, for the very best fixed and vibrant flight performance.

3GX Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically improved performance will produce an instant effect on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the marketplace and includes two ports to straight connect Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions using the computer setup software directs the user through an action by step setup procedure, permitting quick setups without omitting any steps.
With the soon to be released Bluetooth connection set, the 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is required, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to accomplish the most optimum setup for their helicopter without the uncertainty.
3 levels of flight mode are readily available to offer the ideal feel for beginner and advanced pilots.
Custom parameters have actually been developed to allow pilots to fine tune many swashplate and rudder settings and a settings export feature permits custom-made settings to be shared among friends.
The 3GX includes the highest spec gyroscope sensing units, allowing it to be used in the harshest conditions. The dual axis plus rudder sensing unit drastically enhances swashplate and rudder correction precision and will be felt when hovering, as well as during aerobatic regimens.
Appropriate for 200 to 800 class helicopters, radiance engine or electric powered.
The vibration resistant qualities appear even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with totally re-written firmware. The result is a dramatic improvement in stability that matches a flybarred helicopter, while offering explosive dexterity.
With an integrated in pirouette settlement function, the 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with precision.
Rudder control is similar to the high end GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder action qualities, allowing constant rudder feel even under high speed conditions. This outstanding control feel will allow pilots of all ability levels to experience the ideal combination between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensing units making sure positioning of the helicopter with remarkable accuracy and offering the supreme service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Governor Sensor


(1) B6T 2-in-1 Voltage Regulator

Needed To Complete: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel