Align T-Rex 600EFL Pro Super Combo

This is the Align T-Rex 600 EFL Pro Super Combo. Align has taken their T-Rex 600 EFL Pro helicopter and integrated it with a 600MX brushless motor, one 600 3G Carbon fiber blade set, 3 DS610 digital servos, a Castle ICE HV 80 Brushless ESC, one DS650 digital tail servo and their groundbreaking 3GX Programmable Flybarless System.

3GX Programmable Flybarless System Includes:

• Align's recently redesigned 3GX represents a brand new generation of multi function flybarless system.
• The 3GX is currently the lightest and smallest flybarless system currently offered on the market. Its two ports have the ability to directly link Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
• Based on Align's 3G FL760 manual setup process, the 3GX can be easily setup in simply a couple of minutes through a simple process. Plus, the 3GX supports all the CCPM swashplate systems currently offered on the market- including 90, 120, 135, and 140 degree swashplates.
• The included computer setup software directs the user through an action by action setup process, enabling fast setups without omitting any steps.
• With the expected soon to be launched Bluetooth connectivity kit, the 3GX can be configured wirelessly from your PC.
• Custom criteria have been opened up in the 3GX, enabling pilots to tweak a range of settings for the rudder and swashplate. The settings export feature lets you share your custom-made settings with your friends.
• Align's 3GX features brand new gyroscope sensing units, enabling it to be utilized under severe conditions. Its double axis plus rudder sensor considerably enhances rudder and swashplate correction precision, specifically when compared to last generation 3G.
• The 3GX is suitable for helicopter classes from 250 to 800, radiance engine and electrical powered. Its exceptional vibration resistant quality are evident, even when installed with more difficult double sided mounting tape.
• The 3GX utilizes a 16 bit processor, making it 4 times faster than previous generation, together with an entirely re-written firmware. The outcome is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet has explosive agility.
• With integrated in pirouette compensation function, Align's 3GX is able to stabilize your helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flips kind of maneuvers are easily accomplished with precision.
• The 3GX's rudder will give you a consistent rudder feel, even when under high speed conditions. This exceptional control feel will permit pilots of all ability levels to experience the ideal combination between 3GX and helicopter.
• With the APS gyro, your helicopter will have the ability to self stabilize, hold position as well as elevation, as well as self-governing way point flights as well as return home.

T-Rex 600EFL Pro Includes:

• Tail pitch mechanism geared up with high precision bearing
• High speed thrust bearings in tail blade grips
• New lightened landing gear assembly with lower center of gravity
• High quality painted fiberglass canopy with 4-point fast release installs
• Freshly created aerodynamically efficient low drag flybarless head assembly, with detachable blade grip pitch arm for simple maintenance
• Ingenious moving battery tray rails inserted into the 3K side frames, with trademarked spring filled latching mechanism, enables fast battery gain access to as well as battery protection.
• Its frame utilizes 2mm carbon fiber plates of the highest spec. It's made of a patented composite material and a construction strategy that cleverly utilizes frame area that enhances overall rigidness
• Top installed motor base brings the motor's center of gravity better to rotating disc, improving its 3D dexterity
• Brand new 600 class 12S high voltage brushless motor provides generous torque and power output, yet takes in lower average current to prolong battery life
• Optimum motor pinion ratio and tail gear ratio attains the most efficient power output and flight attributes
• Heatsink ingrained into motor mount for effective cooling of motor
• Motor mount consists of 3rd bearing block to offer motor shaft support; efficiently minimizing torque induced shifts, and lessens gear striping problem
• Uses direct link CCPM swashplate control system that make it possible for direct and fast control response.
• Specially created anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
• Utilizes the highest spec CNC modue-1 helical primary gear, with highest load tolerance and lowest noise
• Ergonomically created H-shaped electronic mount to offer flexible company or devices, and minimize wire clutter
• Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidness
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder locking and control efficiency
• Additional radial bearing is contributed to the one way bearing block to make sure smooth rotation

Consists of:
One T-REX 600EFL PRO Packages Set
One Aluminum Tail Boom
One 600 3G Carbon fiber blades
One 600MX Brushless Motor (510KV)
3 DS610 Digital servo
One DS650 Digital servo
One 3GX Flybarless System
One Castle ICE HV 80 Brushless ESC
One 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Dial Pitch Gauge
Receiver (7-channel or more)
Transmitter (7-channel or more, helicopter system)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)

Requirements:

3GX Programmable Flybarless System
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Variety: -300~+300 degree
Z axis Operating Angle Variety: -600~+600 degree
Size: 36.5x25.2x15.6mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 600EFL Pro
Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Own Equipment: 131T
Tail Own Equipment: 34T
Own Equipment Ratio: 1:8.61:3.85
Weight (with Motor): 2290g