Align T-Rex 600EFL Pro Super Combo

This is the Align T-Rex 600 EFL Pro Super Combo. Align has actually taken their T-Rex 600 EFL Pro helicopter and integrated it with a 600MX brushless motor, one 600 3G Carbon fiber blade set, 3 DS610 digital servos, a Castle ICE HV 80 Brushless ESC, one DS650 digital tail servo and their innovative 3GX Programmable Flybarless System.

3GX Programmable Flybarless System Features:

• Align's newly redesigned 3GX represents a brand name new generation of multi function flybarless system.
• The 3GX is currently the lightest and tiniest flybarless system currently offered on the marketplace. Its 2 ports are able to directly connect Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
• Based on Align's 3G FL760 manual setup procedure, the 3GX can be quickly setup in just a couple of minutes through an easy procedure. Plus, the 3GX supports all of the CCPM swashplate systems currently offered on the marketplace- consisting of 90, 120, 135, and 140 degree swashplates.
• The consisted of computer setup software directs the user through a step by action setup procedure, allowing for fast setups without leaving out any steps.
• With the prepared for quickly to be launched Bluetooth connectivity set, the 3GX can be set wirelessly from your PC.
• Custom parameters have actually been opened up in the 3GX, enabling pilots to tweak a variety of settings for the rudder and swashplate. The settings export function lets you share your custom settings with your friends.
• Align's 3GX functions brand name new gyroscope sensors, enabling it to be used under extreme conditions. Its dual axis plus rudder sensor significantly enhances rudder and swashplate correction accuracy, especially when compared with last generation 3G.
• The 3GX appropriates for helicopter classes from 250 to 800, glow engine and electrical powered. Its exceptional vibration resistant characteristic appear, even when installed with more difficult double sided installing tape.
• The 3GX uses a 16 bit processor, making it 4 times faster than previous generation, in addition to a totally re-written firmware. The result is a significant stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet has explosive agility.
• With integrated in pirouette payment function, Align's 3GX has the ability to stabilize your helicopter on a set point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with precision.
• The 3GX's rudder will provide you a constant rudder feel, even when under high speed conditions. This excellent control feel will allow pilots of all ability levels to experience the ideal integration in between 3GX and helicopter.
• With the APS gyro, your helicopter will have the capability to self stabilize, hold position as well as elevation, as well as autonomous method point flights as well as return home.

T-Rex 600EFL Pro Features:

• Tail pitch mechanism geared up with high accuracy bearing
• High speed thrust bearings in tail blade grips
• New lightened landing equipment assembly with lower center of mass
• High quality painted fiberglass canopy with 4-point fast release installs
• Newly designed aerodynamically effective low drag flybarless head assembly, with detachable blade grip pitch arm for simple upkeep
• Ingenious sliding battery tray rails anchored into the 3K side frames, with patented spring packed locking mechanism, enables fast battery access as well as battery protection.
• Its frame uses 2mm carbon fiber plates of the highest specification. It's made from a patented composite product and a building and construction strategy that skillfully uses frame area that enhances total rigidity
• Leading installed motor base brings the motor's center of mass more detailed to turning disc, enhancing its 3D dexterity
• Brand name new 600 class 12S high voltage brushless motor supplies generous torque and power output, yet consumes lower typical current to prolong battery life
• Ideal motor pinion ratio and tail equipment ratio accomplishes the most effective power output and flight qualities
• Heatsink ingrained into motor install for reliable cooling of motor
• Motor install includes 3rd bearing block to supply motor shaft support; successfully reducing torque induced shifts, and minimizes equipment striping problem
• Utilizes direct link CCPM swashplate control system that make it possible for direct and fast control reaction.
• Specially designed anodized CNC servo horns are not just aesthetically pleasing, but are extremely rigid.
• Utilizes the highest spec CNC modue-1 helical main equipment, with highest load tolerance and most affordable sound
• Ergonomically designed H-shaped electronic install to supply flexible company or devices, and decrease wire mess
• Brand name new CNC machined metal tail transmission, with thicker side plates to increase rigidity
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control efficiency
• Extra radial bearing is contributed to the one method bearing block to ensure smooth rotation

Includes:
One T-REX 600EFL PRO Packages Set
One Aluminum Tail Boom
One 600 3G Carbon fiber blades
One 600MX Brushless Motor (510KV)
3 DS610 Digital servo
One DS650 Digital servo
One 3GX Flybarless System
One Castle ICE HV 80 Brushless ESC
One 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Dial Pitch Gauge
Receiver (7-channel or more)
Transmitter (7-channel or more, helicopter system)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)

Specifications:

3GX Programmable Flybarless System
Running Temperature: -10~60 degree
X and Y axis Operating Angle Variety: -300~+300 degree
Z axis Operating Angle Variety: -600~+600 degree
Size: 36.5x25.2x15.6mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 600EFL Pro
Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.61:3.85
Weight (with Motor): 2290g