Align T-Rex 600EFL Pro Super Combo

This is the Align T-Rex 600 EFL Pro Super Combo. Align has actually taken their T-Rex 600 EFL Pro helicopter and combined it with a 600MX brushless motor, one 600 3G Carbon fiber blade set, 3 DS610 digital servos, a Castle ICE HV 80 Brushless ESC, one DS650 digital tail servo and their groundbreaking 3GX Programmable Flybarless System.

3GX Programmable Flybarless System Includes:

• Align's recently upgraded 3GX represents a brand name brand-new generation of multi function flybarless system.
• The 3GX is presently the lightest and smallest flybarless system presently readily available on the marketplace. Its two ports have the ability to straight link Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
• Based on Align's 3G FL760 manual setup procedure, the 3GX can be easily setup in just a few minutes through a simple procedure. Plus, the 3GX supports all of the CCPM swashplate systems presently readily available on the marketplace- consisting of 90, 120, 135, and 140 degree swashplates.
• The included computer setup software directs the user through an action by action setup procedure, enabling fast setups without leaving out any steps.
• With the expected quickly to be released Bluetooth connectivity package, the 3GX can be configured wirelessly from your PC.
• Custom specifications have actually been opened up in the 3GX, permitting pilots to tweak a range of settings for the rudder and swashplate. The settings export function lets you share your customized settings with your friends.
• Align's 3GX features brand name brand-new gyroscope sensing units, permitting it to be utilized under extreme conditions. Its double axis plus rudder sensing unit significantly improves rudder and swashplate correction precision, specifically when compared with last generation 3G.
• The 3GX appropriates for helicopter classes from 250 to 800, radiance engine and electric powered. Its exceptional vibration resistant attribute appear, even when mounted with harder double sided installing tape.
• The 3GX uses a 16 bit processor, making it 4 times faster than previous generation, in addition to a totally re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet has explosive agility.
• With integrated in pirouette payment function, Align's 3GX is able to support your helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.
• The 3GX's rudder will provide you a consistent rudder feel, even when under high speed conditions. This outstanding control feel will permit pilots of all skill levels to experience the perfect combination between 3GX and helicopter.
• With the APS gyro, your helicopter will have the capability to self support, hold position in addition to altitude, and even self-governing way point flights in addition to return home.

T-Rex 600EFL Pro Includes:

• Tail pitch mechanism geared up with high precision bearing
• High speed thrust bearings in tail blade grips
• New lightened landing gear assembly with lower center of mass
• High quality painted fiberglass canopy with 4-point fast release installs
• Recently created aerodynamically effective low drag flybarless head assembly, with detachable blade grip pitch arm for easy maintenance
• Innovative sliding battery tray rails imbedded into the 3K side frames, with trademarked spring loaded locking mechanism, permits fast battery gain access to in addition to battery protection.
• Its frame uses 2mm carbon fiber plates of the greatest spec. It's made of a patented composite material and a building method that skillfully uses frame area that improves overall rigidity
• Top mounted motor base brings the motor's center of mass closer to turning disc, improving its 3D dexterity
• Brand brand-new 600 class 12S high voltage brushless motor provides generous torque and power output, yet consumes lower average current to extend battery life
• Optimum motor pinion ratio and tail gear ratio accomplishes the most effective power output and flight qualities
• Heatsink embedded into motor mount for efficient cooling of motor
• Motor mount includes 3rd bearing block to provide motor shaft assistance; efficiently lowering torque induced shifts, and lessens gear striping issue
• Uses direct link CCPM swashplate control system that enable direct and fast control reaction.
• Specifically created anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
• Utilizes the greatest spec CNC modue-1 helical main gear, with greatest load tolerance and lowest sound
• Ergonomically created H-shaped electronic mount to provide flexible organization or equipment, and reduce wire clutter
• Brand brand-new CNC machined metal tail gear box, with thicker side plates to increase rigidity
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder locking and control effectiveness
• Extra radial bearing is contributed to the one way bearing block to guarantee smooth rotation

Includes:
One T-REX 600EFL PRO Sets Set
One Aluminum Tail Boom
One 600 3G Carbon fiber blades
One 600MX Brushless Motor (510KV)
3 DS610 Digital servo
One DS650 Digital servo
One 3GX Flybarless System
One Castle ICE HV 80 Brushless ESC
One 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Requires:
Dial Pitch Gauge
Receiver (7-channel or more)
Transmitter (7-channel or more, helicopter system)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)

Specs:

3GX Programmable Flybarless System
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm
Weight: 11g
Maximum working voltage: 8.5V

T-Rex 600EFL Pro
Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Drive Gear: 13T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.61:3.85
Weight (with Motor): 2290g