Align T-Rex 600EFL Pro Super Combo

This is the Align T-Rex 600 EFL Pro Super Combination. Align has taken their T-Rex 600 EFL Pro helicopter and combined it with a 600MX brushless motor, one 600 3G Carbon fiber blade set, 3 DS610 digital servos, a Castle ICE HV 80 Brushless ESC, one DS650 digital tail servo and their revolutionary 3GX Programmable Flybarless System.

3GX Programmable Flybarless System Includes:

• Align's recently redesigned 3GX represents a brand name new generation of multi function flybarless system.
• The 3GX is presently the lightest and tiniest flybarless system presently offered on the marketplace. Its 2 ports are able to directly link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
• Based on Align's 3G FL760 manual setup process, the 3GX can be easily setup in simply a few minutes through an easy process. Plus, the 3GX supports all the CCPM swashplate systems presently offered on the marketplace- consisting of 90, 120, 135, and 140 degree swashplates.
• The consisted of computer system setup software directs the user through an action by step setup process, enabling quick setups without leaving out any steps.
• With the expected soon to be released Bluetooth connection package, the 3GX can be set wirelessly from your PC.
• Custom specifications have been opened up in the 3GX, permitting pilots to fine tune a variety of settings for the rudder and swashplate. The settings export function lets you share your customized settings with your friends.
• Align's 3GX features brand name new gyroscope sensing units, permitting it to be utilized under severe conditions. Its dual axis plus rudder sensing unit dramatically enhances rudder and swashplate correction precision, particularly when compared to last generation 3G.
• The 3GX is suitable for helicopter classes from 250 to 800, glow engine and electrical powered. Its remarkable vibration resistant attribute appear, even when mounted with harder double sided mounting tape.
• The 3GX uses a 16 bit processor, making it 4 times faster than previous generation, along with a totally re-written firmware. The outcome is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet possesses explosive agility.
• With integrated in pirouette settlement function, Align's 3GX has the ability to stabilize your helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.
• The 3GX's rudder will provide you a consistent rudder feel, even when under high speed conditions. This exceptional control feel will enable pilots of all ability levels to experience the perfect combination between 3GX and helicopter.
• With the APS gyro, your helicopter will have the capability to self stabilize, hold position as well as altitude, and even self-governing way point flights as well as return home.

T-Rex 600EFL Pro Includes:

• Tail pitch system geared up with high precision bearing
• High speed thrust bearings in tail blade grips
• New lightened landing equipment assembly with lower center of gravity
• High quality painted fiberglass canopy with 4-point quick release mounts
• Freshly designed aerodynamically effective low drag flybarless head assembly, with removable blade grip pitch arm for simple maintenance
• Ingenious moving battery tray rails anchored into the 3K side frames, with patented spring loaded latching system, allows for quick battery access as well as battery protection.
• Its frame utilizes 2mm carbon fiber plates of the greatest specification. It's made of a trademarked composite product and a construction strategy that cleverly utilizes frame area that enhances overall rigidity
• Leading mounted motor base brings the motor's center of gravity more detailed to rotating disc, enhancing its 3D dexterity
• Brand name new 600 class 12S high voltage brushless motor offers generous torque and power output, yet consumes lower average current to extend battery life
• Optimum motor pinion ratio and tail equipment ratio accomplishes the most effective power output and flight characteristics
• Heatsink ingrained into motor install for reliable cooling of motor
• Motor install includes third bearing block to offer motor shaft support; effectively decreasing torque induced shifts, and decreases equipment striping concern
• Utilizes direct link CCPM swashplate control system that allow direct and fast control response.
• Specially designed anodized CNC servo horns are not just visually pleasing, but are extremely rigid.
• Utilizes the greatest spec CNC modue-1 helical main equipment, with greatest load tolerance and lowest sound
• Ergonomically designed H-shaped electronic install to offer versatile company or equipment, and reduce wire mess
• Brand name new CNC machined metal tail gear box, with thicker side plates to increase rigidity
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder locking and control efficiency
• Extra radial bearing is contributed to the one way bearing block to guarantee smooth rotation

Includes:
One T-REX 600EFL PRO Sets Set
One Aluminum Tail Boom
One 600 3G Carbon fiber blades
One 600MX Brushless Motor (510KV)
Three DS610 Digital servo
One DS650 Digital servo
One 3GX Flybarless System
One Castle ICE HV 80 Brushless ESC
One 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Dial Pitch Gauge
Receiver (7-channel or more)
Transmitter (7-channel or more, helicopter system)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)

Specifications:

3GX Programmable Flybarless System
Running Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 600EFL Pro
Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.61:3.85
Weight (with Motor): 2290g