Align T-Rex 600E Pro Super Combo

Align 600E Pro Super Combination Includes:

• Brand brand-new all metal high precision and high rigidness main blade assembly, supplying 3 positive/negative deltas and many Bell & Hiller blending ratios. The head can be tuned for superior stability suitable in F3C competition, or lightening fast agility for 3D aerobatic exhibition.
• The frame utilizes 2mm carbon fiber plates of the greatest specification. Trademarked composite material building method cleverly utilize frame area that improved overall rigidness, and also produced a minimalistic beauty.
• Innovative moving battery tray rails anchored into the 3K side frames, with trademarked spring filled latching mechanism, permitting fast battery access as well as battery protection.
• Heatsink embedded into motor install for effective cooling of motor.
• Top mounted motor base bringing the motor's center of mass better to turning disc, enhancing 3D agility.
• Utilize direct link CCPM swashplate control system to allow direct and fast control action. Specially designed anodized CNC servo horns are not only visually pleasing, but are very rigid.
• Utilizes greatest spec CNC modue-1 helical main equipment, with greatest load tolerance and least expensive noise.
• The most optimal motor pinion ratio and tail equipment ratio to accomplish the most effective power output and flight characteristic.
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder lockingand control effectiveness.
• Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and remove jammed one way bearing.
• Brand brand-new 600 class 12S high voltage brushless motor supplying generous torque and power output, yet takes in lower typical current to lengthen the life of batteries
• Motor install includes 3rd bearing block to supply motor shaft support, effectively decrease torque induced shifts, and lessen equipment striping issue.
• Ergonomically designed H-shaped electronic install to supply versatile company or equipment, and lessen wire clutter.
• Brand brand-new CNC machined metal tail gear box, with thicker side plates to increase rigidness. The more structured design likewise allows for easier disassembly.
• Total pitch series of +15~-15 degrees, for the ultimate 3D explosive power.
• Tail pitch mechanism geared up with high precision bearing.
• High speed thrust bearings in tail blade grips.
• New lightened landing equipment assembly with lower center of gravity.
• High quality painted fiberglass canopy with 4-point fast release mounts.

Note: Users need to have a certain concept of security to run the R/C helicopters. Make certain to read and comply with related safety notes of instruction manual before flying.

This package includes:
(1) T-REX 600E PRO Set
(1) Aluminum Tail Boom
(1) 600 3G Carbon fiber blades
(1) 600MX Brushless Motor (510KV)
(3) DS610 Digital servo
(1) DS650 Digital servo
(1) Castle ICE HV 80 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(2) SIX Li-Po 2600 ~ 5200mAh (3300mAh advised)
Dial Pitch Gauge

Requirements:

Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.61:3.85
Weight (w/Motor): 2350g