Align T-Rex 600E Pro Super Combo

Align 600E Pro Super Combination Includes:

• Brand new all metal high precision and high rigidity main blade assembly, providing 3 positive/negative deltas and many Bell & Hiller mixing ratios. The head can be tuned for exceptional stability suitable in F3C competitors, or lightening fast agility for 3D aerobatic exhibition.
• The frame utilizes 2mm carbon fiber plates of the highest specification. Trademarked composite product building and construction technique skillfully use frame area that improved total rigidity, as well as developed a minimalistic beauty.
• Innovative sliding battery tray rails imbedded into the 3K side frames, with trademarked spring packed latching mechanism, permitting fast battery gain access to in addition to battery protection.
• Heatsink embedded into motor install for reliable cooling of motor.
• Top installed motor base bringing the motor's center of mass more detailed to turning disc, improving 3D agility.
• Utilize direct link CCPM swashplate control system to allow direct and fast control response. Specially designed anodized CNC servo horns are not just visually pleasing, however are incredibly rigid.
• Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and least expensive noise.
• The most optimum motor pinion ratio and tail gear ratio to accomplish the most effective power output and flight characteristic.
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control effectiveness.
• Additional radial bearing is contributed to the one method bearing block to make sure smooth rotation, and eliminate jammed one method bearing.
• Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower typical current to prolong the life of batteries
• Motor install includes 3rd bearing block to offer motor shaft support, successfully lower torque caused shifts, and minimize gear striping issue.
• Ergonomically designed H-shaped electronic install to offer versatile organization or devices, and minimize wire clutter.
• Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more structured style also allows for simpler disassembly.
• Total pitch variety of +15~-15 degrees, for the ultimate 3D explosive power.
• Tail pitch mechanism geared up with high precision bearing.
• High speed thrust bearings in tail blade grips.
• New lightened landing gear assembly with lower center of gravity.
• High quality painted fiberglass canopy with 4-point fast release mounts.

Note: Users need to have a specific principle of security to operate the R/C helicopters. Make sure to read and comply with associated safety notes of instruction manual prior to flying.

This plan includes:
(1) T-REX 600E PRO Package
(1) Aluminum Tail Boom
(1) 600 3G Carbon fiber blades
(1) 600MX Brushless Motor (510KV)
(3) DS610 Digital servo
(1) DS650 Digital servo
(1) Castle ICE HV 80 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(2) 6S Li-Po 2600 ~ 5200mAh (3300mAh advised)
Dial Pitch Gauge

Requirements:

Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Own Equipment: 131T
Tail Own Equipment: 34T
Own Equipment Ratio: 1:8.61:3.85
Weight (w/Motor): 2350g