Align T-Rex 600E Pro Super Combo

Line up 600E Pro Super Combination Features:

• Brand name brand-new all metal high accuracy and high rigidness primary blade assembly, offering 3 positive/negative deltas and numerous Bell & Hiller blending ratios. The head can be tuned for superior stability ideal in F3C competitors, or lightening quick agility for 3D aerobatic exhibition.
• The frame uses 2mm carbon fiber plates of the highest specification. Patented composite material building and construction strategy skillfully use frame space that enhanced general rigidness, as well as developed a minimalistic beauty.
• Innovative sliding battery tray rails anchored into the 3K side frames, with patented spring packed latching mechanism, enabling fast battery gain access to as well as battery protection.
• Heatsink embedded into motor mount for reliable cooling of motor.
• Top installed motor base bringing the motor's center of mass more detailed to rotating disc, improving 3D agility.
• Utilize direct link CCPM swashplate control system to make it possible for direct and quick control reaction. Specifically designed anodized CNC servo horns are not just aesthetically pleasing, but are exceptionally rigid.
• Utilizes highest spec CNC modue-1 helical primary gear, with highest load tolerance and least expensive noise.
• The most ideal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
• Additional radial bearing is contributed to the one method bearing block to guarantee smooth rotation, and remove jammed one method bearing.
• Brand brand-new 600 class 12S high voltage brushless motor offering generous torque and power output, yet consumes lower typical current to extend the life of batteries
• Motor mount includes third bearing block to supply motor shaft support, successfully lower torque induced shifts, and minimize gear striping issue.
• Ergonomically designed H-shaped electronic mount to supply versatile organization or devices, and minimize wire clutter.
• Brand brand-new CNC machined metal tail transmission, with thicker side plates to increase rigidness. The more streamlined style also allows for easier disassembly.
• Total pitch variety of +15~-15 degrees, for the ultimate 3D explosive power.
• Tail pitch mechanism equipped with high accuracy bearing.
• High speed thrust bearings in tail blade grips.
• New lightened landing gear assembly with lower center of gravity.
• High quality painted fiberglass canopy with 4-point fast release mounts.

Note: Users must have a certain concept of security to operate the R/C helicopters. Make certain to check out and adhere to related safety notes of user's manual before flying.

This plan consists of:
(1) T-REX 600E PRO Package
(1) Aluminum Tail Boom
(1) 600 3G Carbon fiber blades
(1) 600MX Brushless Motor (510KV)
(3) DS610 Digital servo
(1) DS650 Digital servo
(1) Castle ICE HV 80 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(2) 6S Li-Po 2600 ~ 5200mAh (3300mAh suggested)
Dial Pitch Gauge

Specifications:

Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Drive Gear: 13T
Main Drive Gear: 112T
Autorotation Tail Own Gear: 131T
Tail Own Gear: 34T
Own Gear Ratio: 1:8.61:3.85
Weight (w/Motor): 2350g