Align T-Rex 600E Pro Super Combo

Line up 600E Pro Super Combination Features:

• Brand new all metal high precision and high rigidity primary blade assembly, supplying 3 positive/negative deltas and numerous Bell & Hiller blending ratios. The head can be tuned for superior stability suitable in F3C competitors, or lightening fast agility for 3D aerobatic exhibition.
• The frame utilizes 2mm carbon fiber plates of the greatest spec. Trademarked composite product building and construction strategy cleverly make use of frame space that enhanced overall rigidity, and also produced a minimalistic beauty.
• Innovative sliding battery tray rails imbedded into the 3K side frames, with trademarked spring packed latching system, enabling fast battery gain access to as well as battery protection.
• Heatsink embedded into motor mount for reliable cooling of motor.
• Top installed motor base bringing the motor's center of mass more detailed to rotating disc, enhancing 3D agility.
• Utilize direct link CCPM swashplate control system to make it possible for direct and fast control action. Specially designed anodized CNC servo horns are not only visually pleasing, but are exceptionally rigid.
• Utilizes greatest spec CNC modue-1 helical primary equipment, with greatest load tolerance and least expensive noise.
• The most optimum motor pinion ratio and tail equipment ratio to accomplish the most efficient power output and flight characteristic.
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder lockingand control effectiveness.
• Additional radial bearing is contributed to the one way bearing block to make sure smooth rotation, and get rid of jammed one way bearing.
• Brand new 600 class 12S high voltage brushless motor supplying generous torque and power output, yet takes in lower typical current to prolong the life of batteries
• Motor mount includes third bearing block to offer motor shaft assistance, successfully reduce torque caused shifts, and minimize equipment striping issue.
• Ergonomically designed H-shaped electronic mount to offer versatile organization or devices, and minimize wire clutter.
• Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more structured style likewise enables simpler disassembly.
• Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
• Tail pitch system equipped with high precision bearing.
• High speed thrust bearings in tail blade grips.
• New lightened landing equipment assembly with lower center of gravity.
• High quality painted fiberglass canopy with 4-point fast release mounts.

Note: Users need to have a specific concept of security to run the R/C helicopters. Be sure to check out and comply with related safety notes of instruction manual prior to flying.

This plan includes:
(1) T-REX 600E PRO Kit
(1) Aluminum Tail Boom
(1) 600 3G Carbon fiber blades
(1) 600MX Brushless Motor (510KV)
(3) DS610 Digital servo
(1) DS650 Digital servo
(1) Castle ICE HV 80 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(2) 6S Li-Po 2600 ~ 5200mAh (3300mAh suggested)
Dial Pitch Gauge

Specifications:

Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Own Equipment: 131T
Tail Own Equipment: 34T
Own Equipment Ratio: 1:8.61:3.85
Weight (w/Motor): 2350g