Align T-REX 600E PRO DFC Super Combo(GPro)

Introducing:
The brand name brand-new T-Rex 600E PRO DFC is the result of innovative engineering inspired by the art of modern industrial style. Matched with Gpro flybarless system, the brand-new generation T-Rex 600E PRO DFC is a show of perfection..
Equipped with the low CG DFC rotor head, efficiently minimize wind resistance throughout flight, offering the most direct and exact control feel back to the pilot; highest spec 2mm thick carbon fiber plate with trademarked plastic integration strategies not only reinforce the structure, but also develop a neat and clean look; Unique battery latch assembly for more powerful install and much easier battery replacement.
A power upgrade system designed particularly to bump up the power output of T-Rex 600E Pro by 30% by updating the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was contributed to the helicopter, with remarkable boost of motor torque output, and near bulletproof governing speed of the rotor, while preserving power consistency throughout the entire flight period. In addition, the brand name brand-new spindle shaft style includes bigger diameter from 6mm to 8mm, with large M5x10mm spindle screws to increase the rigidness of the total rotor head.
The amazing flying performance and control feel of the T-Rex 600E PRO DFC, together with 750MX(530KV) motor, makes this helicopter the creme of crop among all competitors!

Standard equipment:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Requirements:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Gear: 14T
Main Drive Gear: 118T
Autorotation Tail Own Gear: 131T
Tail Own Gear: 34T
Own Gear Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Devices:
T-REX 600E DFC Packages Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Features :
LINE UP brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly brand-new software structure improves system payment, bring GPro up with exact and nimble action, as well as keep up-to-date flying performance than ever.The essential is that utilizes with most current iOS and Android APP can be quickly and directly adjusted through smart phone while at the field. New human oriented interface allows hassle-free and rapid setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with exact and nimble response.
Freshly brand-new software procedure structure improves system payment and keep up-to-date flying performance.
Utilizes with most current iOS and Android APP that GPro can be quickly and directly adjusted through smart phone while flying outdoors.
New human oriented interface allows hassle-free and rapid setup and installation.
Superior flying characteristic remain the exact same flying control amongst T-REX 250~800 helicopters.
Full support receivers and satellites currently on the marketplace, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Operating voltage range:DC 3.5V~8.4V
Operating present usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup