Align T-REX 600E PRO DFC Super Combo(GPro)

Presenting:
The brand brand-new T-Rex 600E PRO DFC is the result of innovative engineering motivated by the art of modern commercial design. Matched with Gpro flybarless system, the brand-new generation T-Rex 600E PRO DFC is a show of perfection..
Equipped with the low CG DFC rotor head, successfully lower wind resistance during flight, providing the most direct and accurate control feel back to the pilot; greatest spec 2mm thick carbon fiber plate with patented plastic combination methods not only reinforce the structure, but likewise produce a cool and clean appearance; Distinct battery lock assembly for stronger mount and easier battery replacement.
A power upgrade system developed particularly to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo battery charger was added to the helicopter, with remarkable boost of motor torque output, and near bulletproof governing speed of the rotor, while keeping power consistency throughout the entire flight duration. In addition, the brand brand-new spindle shaft design features enlarged size from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidness of the overall rotor head.
The amazing flying performance and control feel of the T-Rex 600E PRO DFC, together with 750MX(530KV) motor, makes this helicopter the creme of crop among all competitors!

Standard devices:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Specification:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Pinion Equipment: 14T
Main Drive Equipment: 118T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Devices:
T-REX 600E DFC Kits Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic devices required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Includes :
LINE UP brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The newly brand-new software structure improves system compensation, bring GPro up with accurate and agile reaction, as well as keep current flying performance than ever.The essential is that uses with newest iOS and Android APP can be easily and straight adjusted through smart phone while at the field. New human oriented interface allows hassle-free and fast setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with accurate and agile response.
Freshly brand-new software process structure improves system compensation and keep current flying performance.
Utilizes with newest iOS and Android APP that GPro can be easily and straight adjusted through smart phone while flying outdoors.
New human oriented interface allows hassle-free and fast setup and installation.
Superior flying particular remain the very same flying control among T-REX 250~800 helicopters.
Full support receivers and satellites presently on the market, consisting of S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Running voltage variety:DC 3.5V~8.4V
Running current intake:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup