Align T-REX 600E PRO DFC Super Combo(GPro)

Introducing:
The brand brand-new T-Rex 600E PRO DFC is the result of innovative engineering motivated by the art of modern-day industrial design. Matched with Gpro flybarless system, the brand-new generation T-Rex 600E PRO DFC is a program of excellence..
Equipped with the low CG DFC rotor head, efficiently decrease wind resistance throughout flight, providing the most direct and accurate control feel back to the pilot; greatest spec 2mm thick carbon fiber plate with trademarked plastic integration strategies not just enhance the structure, but likewise create a cool and tidy look; Distinct battery lock assembly for stronger mount and simpler battery replacement.
A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30% by updating the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was contributed to the helicopter, with dramatic boost of motor torque output, and near bulletproof governing speed of the rotor, while preserving power consistency throughout the whole flight period. In addition, the brand brand-new spindle shaft design includes bigger diameter from 6mm to 8mm, with extra-large M5x10mm spindle screws to increase the rigidity of the general rotor head.
The amazing flying efficiency and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors!

Standard devices:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Spec:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Gear: 14T
Main Drive Gear: 118T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Accessories:
T-REX 600E DFC Packages Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Features :
ALIGN brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The newly brand-new software structure improves system compensation, bring GPro up with accurate and nimble action, as well as keep up-to-date flying efficiency than ever.The most important is that makes use of with most current iOS and Android APP can be easily and straight adjusted through mobile phone while at the field. New human oriented user interface permits practical and quick setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with accurate and nimble response.
Freshly brand-new software process structure improves system compensation and keep up-to-date flying performance.
Utilizes with most current iOS and Android APP that GPro can be easily and straight adjusted through mobile phone while flying outdoors.
New human oriented user interface permits practical and quick setup and installation.
Superior flying particular stay the very same flying control amongst T-REX 250~800 helicopters.
Full assistance receivers and satellites presently on the marketplace, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Operating voltage range:DC 3.5V~8.4V
Operating current consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup