Align T-REX 600E PRO DFC Super Combo(GPro)

Introducing:
The brand new T-Rex 600E PRO DFC is the outcome of ingenious engineering influenced by the art of modern commercial design. Matched with Gpro flybarless system, the new generation T-Rex 600E PRO DFC is a program of excellence..
Geared up with the low CG DFC rotor head, efficiently reduce wind resistance throughout flight, providing the most direct and exact control feel back to the pilot; greatest spec 2mm thick carbon fiber plate with patented plastic integration strategies not just reinforce the structure, but also develop a cool and tidy look; Distinct battery lock assembly for stronger install and much easier battery replacement.
A power upgrade system developed particularly to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was contributed to the helicopter, with significant boost of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the whole flight duration. In addition, the brand new spindle shaft design features enlarged size from 6mm to 8mm, with large M5x10mm spindle screws to increase the rigidity of the overall rotor head.
The astounding flying performance and control feel of the T-Rex 600E PRO DFC, together with 750MX(530KV) motor, makes this helicopter the creme of crop among all competitors!

Standard equipment:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Requirements:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Equipment: 14T
Main Drive Equipment: 118T
Autorotation Tail Own Equipment: 131T
Tail Own Equipment: 34T
Own Equipment Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Accessories:
T-REX 600E DFC Packages Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Features :
LINE UP new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The newly new software structure enhances system settlement, bring GPro up with exact and nimble response, as well as keep current flying performance than ever.The most important is that utilizes with most current iOS and Android APP can be easily and straight adjusted through mobile phone while at the field. New human oriented user interface permits practical and rapid setup and installation.

Brand new CPU, processing 20 times faster than previous generation, bring GPro up with exact and nimble response.
Freshly new software process structure enhances system settlement and keep current flying performance.
Utilizes with most current iOS and Android APP that GPro can be easily and straight adjusted through mobile phone while flying outdoors.
New human oriented user interface permits practical and rapid setup and installation.
Superior flying characteristic stay the exact same flying control amongst T-REX 250~800 helicopters.
Full support receivers and satellites currently on the marketplace, consisting of S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Running voltage variety:DC 3.5V~8.4V
Running existing consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup