Align T-REX 600E PRO DFC Super Combo(GPro)

Presenting:
The brand name new T-Rex 600E PRO DFC is the result of ingenious engineering influenced by the art of modern-day industrial style. Matched with Gpro flybarless system, the new generation T-Rex 600E PRO DFC is a show of perfection..
Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, supplying the most direct and exact control feel back to the pilot; highest spec 2mm thick carbon fiber plate with trademarked plastic integration techniques not just strengthen the structure, but also create a cool and clean appearance; Special battery latch assembly for stronger mount and much easier battery replacement.
A power upgrade system developed specifically to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo battery charger was contributed to the helicopter, with dramatic boost of motor torque output, and near bulletproof governing speed of the rotor, while preserving power consistency throughout the entire flight duration. In addition, the brand name new spindle shaft style includes bigger diameter from 6mm to 8mm, with extra-large M5x10mm spindle screws to increase the rigidity of the total rotor head.
The amazing flying efficiency and control feel of the T-Rex 600E PRO DFC, in addition to 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors!

Standard devices:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Specification:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Pinion Gear: 14T
Main Drive Gear: 118T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Accessories:
T-REX 600E DFC Packages Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Features :
LINE UP new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The newly new software application structure improves system compensation, bring GPro up with exact and nimble action, and also keep up-to-date flying efficiency than ever.The essential is that utilizes with newest iOS and Android APP can be quickly and directly changed through cellphone while at the field. New human oriented interface enables practical and fast setup and installation.

Brand new CPU, processing 20 times faster than previous generation, bring GPro up with exact and nimble response.
Freshly new software application procedure structure improves system compensation and keep up-to-date flying performance.
Utilizes with newest iOS and Android APP that GPro can be quickly and directly changed through cellphone while flying outdoors.
New human oriented interface enables practical and fast setup and installation.
Superior flying characteristic stay the exact same flying control amongst T-REX 250~800 helicopters.
Full support receivers and satellites currently on the market, consisting of S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Running voltage variety:DC 3.5V~8.4V
Running existing consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup