Align T-REX 600E PRO DFC Combo (With out GPro)

Presenting:
The brand brand-new T-Rex 600E PRO DFC is the outcome of innovative engineering motivated by the art of contemporary industrial design. Matched with Gpro flybarless system, the brand-new generation T-Rex 600E PRO DFC is a program of excellence..
Equipped with the low CG DFC rotor head, effectively reduce wind resistance throughout flight, providing the most direct and precise control feel back to the pilot; highest spec 2mm thick carbon fiber plate with patented plastic combination strategies not just reinforce the structure, however also produce a neat and tidy appearance; Distinct battery lock assembly for more powerful install and simpler battery replacement.
A power upgrade system created particularly to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic boost of motor torque output, and near bulletproof governing speed of the rotor, while preserving power consistency throughout the whole flight duration. In addition, the brand brand-new spindle shaft design includes enlarged size from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
The unbelievable flying efficiency and control feel of the T-Rex 600E PRO DFC, together with 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors!

Standard equipment:
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Specification:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Equipment: 14T
Main Drive Equipment: 118T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Devices:
T-REX 600E DFC Packages Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Features :
LINE UP brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The newly brand-new software application structure enhances system compensation, bring GPro up with precise and agile response, as well as keep updated flying efficiency than ever.The essential is that utilizes with latest iOS and Android APP can be quickly and directly changed through smart phone while at the field. New human oriented user interface allows hassle-free and quick setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with precise and agile response.
Freshly brand-new software application procedure structure enhances system compensation and keep updated flying performance.
Utilizes with latest iOS and Android APP that GPro can be quickly and directly changed through smart phone while flying outdoors.
New human oriented user interface allows hassle-free and quick setup and installation.
Superior flying particular stay the same flying control among T-REX 250~800 helicopters.
Full assistance receivers and satellites currently on the marketplace, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Operating voltage variety:DC 3.5V~8.4V
Operating current usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup