Align T-REX 600E PRO DFC Combo (No 3GX)

Specification(T-REX 600E PRO DFC) :
1.Equipped with the low CG DFC rotor head, efficiently lower wind resistance during flight, offering the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unthinkable flight speed.
2.The frame utilizes 2mm carbon fiber plates of the greatest specification. Trademarked composite product building technique skillfully utilize frame space that improved total rigidity, and also created a minimalistic appeal.
3.Ingenious sliding battery tray rails anchored into the 3K side frames, with trademarked spring packed latching system, permitting quick battery gain access to as well as battery security.
4.Heatsink ingrained into motor install for reliable cooling of motor.
5.Top mounted motor base bringing the motor?s center of mass better to rotating disc, enhancing 3D agility.
6.Use direct link CCPM swashplate control system to make it possible for direct and fast control action. Specially developed anodized CNC servo horns are not only aesthetically pleasing, but are exceptionally stiff.
7.Uses greatest spec CNC modue-1 helical main gear, with greatest load tolerance and least expensive sound.
8.The most optimal motor pinion ratio and tail gear ratio to attain the most efficient power output and flight particular.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder lockingand control efficiency.
10.Extra radial bearing is added to the one method bearing block to ensure smooth rotation, and remove jammed one method bearing.
11.Brand name new 600 class 12S high voltage brushless motor offering generous torque and power output, yet consumes lower typical current to prolong the life of batteries
12.Motor install includes third bearing block to provide motor shaft support, efficiently lower torque induced shifts, and decrease gear striping concern.
13.High quality new tail transmission design, integrated with new double point mounted tail pitch control assembly to decrease slops and increase rudder control precision.
14.Brand name new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
15.Total pitch series of +15~-15 degrees, for the ultimate 3D explosive power.
16.Tail pitch system equipped with high precision bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of mass.
19.High quality painted fiberglass canopy with 4-point quick release mounts.

Users need to have a specific idea of security to operate the R/C helicopters.
Be sure to check out and abide by related security notes of user's manual before flying.

Specification(T-REX 600E PRO DFC):
Length: 1174mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Equipment:13T
Main Drive Equipment:112T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.61:3.85
Weight(With Motor): 2290g

Accessories:
T-REX 600E PRO DFC Packages Set X1
600 3G Carbon fiber blades X1
600MX Brushless Motor(510KV) X1
DS615 Standard servo X3
DS655 Specialized servo X1
Castle ICE2 HV 80 Brushless ESC X1
6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)
Dial Pitch Gauge or Digital Pitch Gauge
3GX Flybarless System X1