Align T-REX 600E PRO DFC Combo (No 3GX)

Requirements(T-REX 600E PRO DFC) :
1.Equipped with the low CG DFC rotor head, successfully minimize wind resistance during flight, providing the most direct and exact control feel back to the pilot, and displays exhilarating 3D performance and unthinkable flight speed.
2.The frame makes use of 2mm carbon fiber plates of the greatest spec. Trademarked composite product construction strategy skillfully use frame area that enhanced overall rigidity, and also created a minimalistic charm.
3.Innovative sliding battery tray rails inserted into the 3K side frames, with trademarked spring loaded locking system, enabling quick battery access as well as battery defense.
4.Heatsink ingrained into motor install for effective cooling of motor.
5.Leading mounted motor base bringing the motor?s center of mass closer to turning disc, improving 3D dexterity.
6.Make use of direct link CCPM swashplate control system to make it possible for direct and quick control reaction. Specially created anodized CNC servo horns are not just aesthetically pleasing, however are exceptionally stiff.
7.Makes use of greatest spec CNC modue-1 helical main gear, with greatest load tolerance and least expensive noise.
8.The most optimum motor pinion ratio and tail gear ratio to accomplish the most efficient power output and flight particular.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control efficiency.
10.Extra radial bearing is contributed to the one way bearing block to guarantee smooth rotation, and get rid of jammed one way bearing.
11.Brand brand-new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries
12.Motor install includes third bearing block to supply motor shaft assistance, successfully minimize torque caused shifts, and lessen gear striping issue.
13.High quality brand-new tail transmission design, integrated with brand-new dual point mounted tail pitch control assembly to lessen slops and increase rudder control accuracy.
14.Brand brand-new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more structured design likewise permits easier disassembly.
15.Total pitch series of +15~-15 degrees, for the supreme 3D explosive power.
16.Tail pitch system geared up with high accuracy bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of mass.
19.High quality painted fiberglass canopy with 4-point quick release mounts.

Users need to have a certain concept of security to run the R/C helicopters.
Be sure to check out and comply with associated security notes of user's manual before flying.

Requirements(T-REX 600E PRO DFC):
Length: 1174mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Gear:13T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.61:3.85
Weight(With Motor): 2290g

Devices:
T-REX 600E PRO DFC Packages Set X1
600 3G Carbon fiber blades X1
600MX Brushless Motor(510KV) X1
DS615 Standard servo X3
DS655 Specialized servo X1
Castle ICE2 HV 80 Brushless ESC X1
6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1

Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)
Dial Pitch Gauge or Digital Pitch Gauge
3GX Flybarless System X1