Align T-REX 600E PRO DFC Combo (No 3GX)

Requirements(T-REX 600E PRO DFC) :
1.Geared up with the low CG DFC rotor head, successfully reduce wind resistance throughout flight, providing the most direct and accurate control feel back to the pilot, and shows exhilarating 3D efficiency and unthinkable flight speed.
2.The frame utilizes 2mm carbon fiber plates of the greatest spec. Patented composite product construction strategy skillfully utilize frame space that improved total rigidness, and also created a minimalistic charm.
3.Ingenious moving battery tray rails anchored into the 3K side frames, with trademarked spring packed latching system, enabling quick battery gain access to along with battery security.
4.Heatsink embedded into motor install for effective cooling of motor.
5.Leading mounted motor base bringing the motor?s center of gravity more detailed to rotating disc, enhancing 3D agility.
6.Use direct link CCPM swashplate control system to make it possible for direct and quick control reaction. Specifically designed anodized CNC servo horns are not just aesthetically pleasing, however are incredibly stiff.
7.Makes use of greatest spec CNC modue-1 helical primary gear, with greatest load tolerance and lowest noise.
8.The most optimal motor pinion ratio and tail gear ratio to achieve the most effective power output and flight particular.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder lockingand control effectiveness.
10.Extra radial bearing is contributed to the one method bearing block to guarantee smooth rotation, and remove jammed one method bearing.
11.Brand brand-new 600 class 12S high voltage brushless motor providing generous torque and power output, yet takes in lower average current to extend the life of batteries
12.Motor install includes 3rd bearing block to offer motor shaft assistance, successfully reduce torque induced shifts, and lessen gear striping problem.
13.High quality brand-new tail transmission style, integrated with brand-new double point mounted tail pitch control assembly to lessen slops and increase rudder control accuracy.
14.Brand brand-new CNC machined metal tail transmission, with thicker side plates to increase rigidness. The more streamlined style also permits simpler disassembly.
15.Overall pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
16.Tail pitch system equipped with high accuracy bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of gravity.
19.High quality painted fiberglass canopy with 4-point quick release mounts.

Users must have a specific principle of security to run the R/C helicopters.
Be sure to read and adhere to related safety notes of instruction manual prior to flying.

Requirements(T-REX 600E PRO DFC):
Length: 1174mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Drive Gear:13T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.61:3.85
Weight(With Motor): 2290g

Devices:
T-REX 600E PRO DFC Packages Set X1
600 3G Carbon fiber blades X1
600MX Brushless Motor(510KV) X1
DS615 Standard servo X3
DS655 Specialized servo X1
Castle ICE2 HV 80 Brushless ESC X1
6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1

Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)
Dial Pitch Gauge or Digital Pitch Gauge
3GX Flybarless System X1