Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Features:

The frame utilizes 2mm carbon fiber plates of the highest spec. Trademarked composite material building strategy cleverly make use of frame area that improved general rigidness, and also produced a minimalistic beauty.
Heatsink embedded into motor mount for efficient cooling of motor.
Utilize direct link CCPM swashplate control system to allow direct and fast control action. Specially created anodized CNC servo horns are not only aesthetically pleasing, but are exceptionally rigid.
The most optimal motor pinion ratio and tail gear ratio to accomplish the most effective power output and flight characteristic.
Additional radial bearing is contributed to the one way bearing block to make sure smooth rotation, and get rid of jammed one way bearing.
Motor mount includes third bearing block to provide motor shaft support, efficiently decrease torque induced shifts, and minimize gear striping issue.
Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidness. The more streamlined design also allows for simpler disassembly.
Tail pitch system geared up with high accuracy bearing.
New lightened landing gear assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, efficiently decrease wind resistance during flight, supplying the most direct and exact control feel back to the pilot, and displays thrilling 3D performance and unimaginable flight speed.
Innovative sliding battery tray rails imbedded into the 3K side frames, with trademarked spring loaded latching system, permitting quick battery access as well as battery protection.
Top mounted motor base bringing the motor???s center of gravity better to turning disc, enhancing 3D agility.
Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and most affordable noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder lockingand control effectiveness.
Brand new 600 class 12S high voltage brushless motor supplying generous torque and power output, yet consumes lower average current to lengthen the life of batteries.
High quality new tail gearbox design, integrated with new double point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
Total pitch series of +15~-15 degrees, for the ultimate 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point quick release installs.

3GX Programmable Flybarless System Features:

3GX is presently the tiniest and lightest flybarless system readily available on the market. 2 ports to straight link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system
Illustrated guidelines on the computer system setup software application assists direct the user through a step by action setup process, permitting quick setups without leaving out any actions
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to decrease electronic wire mess
3GX utilizes brand name new gyroscope sensors of the highest specs when compared to other flybarless systems presently on the market, permitting it to be utilized under severe conditions. Dual axis plus rudder sensor significantly improves swashplate and rudder correction accuracy compared to last generation 3G. This is plainly visible in steady hover as well as extremely aerobatic regimens
The exceptional vibration resistant attribute is evident even when mounted with more difficult double sided installing tape
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility
3GX's rudder permits consistent rudder feel even under high speed conditions. This excellent control feel will enable pilot of all skill levels to experience the ideal combination in between 3GX and helicopter.
Brand new upgraded 3GX represents a new generation of multi function flybarless system. The significantly improved performance will produce instant effect on any enthusiasts.
Based on the 3G FL760 manual setup process, the 3GX can be setup in just a couple of minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connectivity- With the quickly to be released Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps permitting live modifications to 3GX without powering down.
Custom parameters have actually been opened up in 3GX to enable pilots to fine tune various settings for the swashplate and rudder. The settings export feature permits custom-made settings to be shared among friends.
Suitable for helicopters of all class from 250 to 800, radiance engine or electric powered.
With built in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Requirement servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Requires:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)
Digital Pitch Gauge/Dial Pitch Gauge