Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Characteristics:

The frame makes use of 2mm carbon fiber plates of the highest specification. Patented composite product building method cleverly utilize frame space that enhanced total rigidity, and also developed a minimalistic beauty.
Heatsink embedded into motor install for effective cooling of motor.
Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only aesthetically pleasing, but are very rigid.
The most ideal motor pinion ratio and tail equipment ratio to accomplish the most effective power output and flight characteristic.
Additional radial bearing is contributed to the one method bearing block to ensure smooth rotation, and eliminate jammed one method bearing.
Motor install includes 3rd bearing block to offer motor shaft assistance, effectively minimize torque induced shifts, and decrease equipment striping issue.
Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more structured design also permits simpler disassembly.
Tail pitch system equipped with high precision bearing.
New lightened landing equipment assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, effectively minimize wind resistance during flight, providing the most direct and exact control feel back to the pilot, and shows thrilling 3D efficiency and unthinkable flight speed.
Innovative moving battery tray rails inserted into the 3K side frames, with patented spring filled locking system, enabling quick battery access along with battery protection.
Top installed motor base bringing the motor???s center of mass better to rotating disc, improving 3D agility.
Utilizes highest spec CNC modue-1 helical primary equipment, with highest load tolerance and lowest noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder lockingand control effectiveness.
Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet takes in lower typical current to prolong the life of batteries.
High quality new tail transmission design, combined with new double point installed tail pitch control assembly to decrease slops and increase rudder control precision.
Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point quick release installs.

3GX Programmable Flybarless System Includes:

3GX is currently the smallest and lightest flybarless system available on the market. Two ports to straight link Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system
Illustrated guidelines on the computer system setup software application assists direct the user through an action by step setup procedure, enabling quick setups without leaving out any steps
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to minimize electronic wire clutters
3GX makes use of brand name new gyroscope sensors of the highest requirements when compared to other flybarless systems currently on the market, allowing it to be utilized under extreme conditions. Double axis plus rudder sensing unit dramatically enhances swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in steady hover along with extremely aerobatic routines
The superior vibration resistant quality appears even when installed with harder double sided installing tape
3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive dexterity
3GX's rudder permits constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the perfect combination between 3GX and helicopter.
Brand new redesigned 3GX represents a brand-new generation of multi function flybarless system. The dramatically enhanced efficiency will create instant influence on any enthusiasts.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in just a few minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connection- With the soon to be launched Bluetooth connection package, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps allowing live modifications to 3GX without powering down.
Custom specifications have actually been opened up in 3GX to enable pilots to fine tune numerous settings for the swashplate and rudder. The settings export feature permits custom-made settings to be shared among friends.
Suitable for helicopters of all class from 250 to 800, radiance engine or electric powered.
With integrated in pirouette settlement function, the 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily achieved with precision.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize, hold position along with elevation, as well as autonomous method point flights along with return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Standard servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)
Digital Pitch Gauge/Dial Pitch Gauge