Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Characteristics:

The frame makes use of 2mm carbon fiber plates of the greatest specification. Patented composite product building and construction method cleverly use frame area that enhanced general rigidness, and also developed a minimalistic beauty.
Heatsink embedded into motor install for efficient cooling of motor.
Utilize direct link CCPM swashplate control system to make it possible for direct and fast control reaction. Specifically developed anodized CNC servo horns are not only aesthetically pleasing, but are incredibly rigid.
The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and get rid of jammed one way bearing.
Motor install consists of 3rd bearing block to offer motor shaft support, effectively decrease torque caused shifts, and lessen gear striping issue.
Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidness. The more streamlined style likewise allows for simpler disassembly.
Tail pitch mechanism equipped with high accuracy bearing.
New lightened landing gear assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, effectively decrease wind resistance during flight, supplying the most direct and precise control feel back to the pilot, and shows exhilarating 3D performance and inconceivable flight speed.
Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring filled locking mechanism, enabling fast battery access along with battery protection.
Top mounted motor base bringing the motor???s center of gravity closer to rotating disc, enhancing 3D agility.
Utilizes greatest spec CNC modue-1 helical main gear, with greatest load tolerance and most affordable noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control effectiveness.
Brand new 600 class 12S high voltage brushless motor supplying generous torque and power output, yet takes in lower typical current to prolong the life of batteries.
High quality new tail transmission style, combined with new dual point mounted tail pitch control assembly to lessen slops and increase rudder control precision.
Total pitch range of +15~-15 degrees, for the supreme 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point fast release mounts.

3GX Programmable Flybarless System Features:

3GX is presently the smallest and lightest flybarless system available on the market. Two ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system
Illustrated guidelines on the computer system setup software helps direct the user through an action by action setup procedure, enabling fast setups without omitting any steps
With 3GX's built in Align RCE-G600 governor function, no external governor is required to decrease electronic wire clutters
3GX makes use of brand new gyroscope sensing units of the greatest requirements when compared to other flybarless systems presently on the market, enabling it to be used under harsh conditions. Dual axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy compared to last generation 3G. This is clearly obvious in steady hover along with extremely aerobatic routines
The exceptional vibration resistant attribute appears even when mounted with harder double sided installing tape
3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive dexterity
3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will enable pilot of all ability levels to experience the ideal combination in between 3GX and helicopter.
Brand new redesigned 3GX represents a brand-new generation of multi function flybarless system. The dramatically enhanced performance will develop immediate impact on any enthusiasts.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in just a couple of minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connection- With the soon to be launched Bluetooth connection set, the 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live changes to 3GX without powering down.
Custom criteria have actually been opened up in 3GX to enable pilots to tweak various settings for the swashplate and rudder. The settings export function allows custom settings to be shared among friends.
Suitable for helicopters of all class from 250 to 800, glow engine or electric powered.
With built in pirouette compensation function, the 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position along with altitude, as well as self-governing way point flights along with return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Requirement servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Requires:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)
Digital Pitch Gauge/Dial Pitch Gauge