Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Characteristics:

The frame utilizes 2mm carbon fiber plates of the highest spec. Trademarked composite product building strategy cleverly utilize frame area that enhanced total rigidness, and also developed a minimalistic beauty.
Heatsink embedded into motor install for efficient cooling of motor.
Utilize direct link CCPM swashplate control system to enable direct and fast control action. Specially developed anodized CNC servo horns are not just aesthetically pleasing, but are exceptionally rigid.
The most optimal motor pinion ratio and tail equipment ratio to achieve the most effective power output and flight characteristic.
Additional radial bearing is added to the one way bearing block to guarantee smooth rotation, and eliminate jammed one way bearing.
Motor install consists of 3rd bearing block to supply motor shaft assistance, successfully minimize torque induced shifts, and decrease equipment striping issue.
Brand brand-new CNC machined metal tail transmission, with thicker side plates to increase rigidness. The more streamlined style likewise allows for easier disassembly.
Tail pitch system geared up with high accuracy bearing.
New lightened landing equipment assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, successfully minimize wind resistance throughout flight, providing the most direct and precise control feel back to the pilot, and exhibits exciting 3D performance and unthinkable flight speed.
Innovative sliding battery tray rails anchored into the 3K side frames, with trademarked spring filled locking system, allowing for quick battery access in addition to battery protection.
Top mounted motor base bringing the motor???s center of mass closer to rotating disc, enhancing 3D agility.
Utilizes highest spec CNC modue-1 helical main equipment, with highest load tolerance and least expensive noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder lockingand control effectiveness.
Brand brand-new 600 class 12S high voltage brushless motor providing generous torque and power output, yet takes in lower typical current to prolong the life of batteries.
High quality brand-new tail transmission style, combined with brand-new double point mounted tail pitch control assembly to decrease slops and increase rudder control precision.
Total pitch range of +15~-15 degrees, for the supreme 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point quick release installs.

3GX Programmable Flybarless System Features:

3GX is presently the smallest and lightest flybarless system offered on the market. 2 ports to straight link Spektrum and JR satellite receivers, along with complete assistance of Futaba's S-BUS system
Illustrated directions on the computer setup software application helps direct the user through a step by action setup process, allowing for quick setups without omitting any steps
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required to minimize electronic wire clutters
3GX utilizes brand brand-new gyroscope sensors of the highest specifications when compared with other flybarless systems presently on the market, enabling it to be utilized under severe conditions. Double axis plus rudder sensor considerably improves swashplate and rudder correction accuracy compared with last generation 3G. This is clearly visible in steady hover in addition to highly aerobatic regimens
The exceptional vibration resistant attribute appears even when mounted with more difficult double sided mounting tape
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive dexterity
3GX's rudder allows constant rudder feel even under high speed conditions. This excellent control feel will enable pilot of all ability levels to experience the perfect integration in between 3GX and helicopter.
Brand brand-new revamped 3GX represents a new generation of multi function flybarless system. The considerably enhanced performance will create instant influence on any enthusiasts.
Based on the 3G FL760 manual setup process, the 3GX can be setup in simply a couple of minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connectivity- With the quickly to be launched Bluetooth connectivity kit, the 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live changes to 3GX without powering down.
Custom specifications have been opened up in 3GX to enable pilots to fine tune various settings for the swashplate and rudder. The settings export function allows custom settings to be shared amongst friends.
Suitable for helicopters of all class from 250 to 800, glow engine or electrical powered.
With integrated in pirouette settlement function, the 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns type of maneuvers are quickly accomplished with precision.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position in addition to altitude, and even self-governing way point flights in addition to return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Requirement servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Requires:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge