Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Characteristics:

The frame utilizes 2mm carbon fiber plates of the highest specification. Trademarked composite material construction strategy cleverly utilize frame area that improved total rigidity, and also produced a minimalistic beauty.
Heatsink embedded into motor mount for reliable cooling of motor.
Utilize direct link CCPM swashplate control system to make it possible for direct and quick control response. Specially developed anodized CNC servo horns are not just visually pleasing, but are exceptionally rigid.
The most optimum motor pinion ratio and tail gear ratio to accomplish the most efficient power output and flight characteristic.
Additional radial bearing is added to the one method bearing block to make sure smooth rotation, and get rid of jammed one method bearing.
Motor mount includes 3rd bearing block to supply motor shaft support, successfully reduce torque caused shifts, and lessen gear striping issue.
Brand brand-new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more structured style also allows for easier disassembly.
Tail pitch mechanism equipped with high precision bearing.
New lightened landing gear assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, successfully reduce wind resistance throughout flight, offering the most direct and accurate control feel back to the pilot, and displays thrilling 3D efficiency and unthinkable flight speed.
Innovative moving battery tray rails imbedded into the 3K side frames, with patented spring packed locking mechanism, permitting fast battery gain access to in addition to battery protection.
Top mounted motor base bringing the motor???s center of gravity more detailed to rotating disc, improving 3D agility.
Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and most affordable noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
Brand brand-new 600 class 12S high voltage brushless motor offering generous torque and power output, yet consumes lower typical current to extend the life of batteries.
High quality brand-new tail transmission style, combined with brand-new double point mounted tail pitch control assembly to lessen slops and increase rudder control precision.
Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point fast release installs.

3GX Programmable Flybarless System Features:

3GX is presently the smallest and lightest flybarless system offered on the market. Two ports to directly connect Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system
Illustrated instructions on the computer system setup software application helps direct the user through an action by step setup procedure, permitting fast setups without leaving out any actions
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to reduce electronic wire mess
3GX utilizes brand name brand-new gyroscope sensors of the highest specs when compared to other flybarless systems presently on the market, enabling it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is plainly visible in steady hover in addition to highly aerobatic routines
The superior vibration resistant attribute is evident even when mounted with more difficult double sided mounting tape
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive dexterity
3GX's rudder allows constant rudder feel even under high speed conditions. This outstanding control feel will permit pilot of all skill levels to experience the perfect combination between 3GX and helicopter.
Brand brand-new revamped 3GX represents a new generation of multi function flybarless system. The dramatically improved efficiency will create immediate effect on any enthusiasts.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in simply a couple of minutes through a basic procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connectivity- With the soon to be launched Bluetooth connectivity kit, the 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps enabling live modifications to 3GX without powering down.
Custom criteria have been opened up in 3GX to permit pilots to tweak numerous settings for the swashplate and rudder. The settings export feature allows custom-made settings to be shared amongst friends.
Suitable for helicopters of all class from 250 to 800, glow engine or electrical powered.
With integrated in pirouette payment function, the 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are easily achieved with precision.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position in addition to elevation, as well as self-governing method point flights in addition to return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Requirement servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh tip)
Digital Pitch Gauge/Dial Pitch Gauge