Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Features:

The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite product building method skillfully utilize frame area that enhanced total rigidity, and also produced a minimalistic beauty.
Heatsink embedded into motor mount for reliable cooling of motor.
Utilize direct link CCPM swashplate control system to make it possible for direct and quick control response. Specially created anodized CNC servo horns are not just visually pleasing, but are exceptionally rigid.
The most optimal motor pinion ratio and tail equipment ratio to accomplish the most efficient power output and flight characteristic.
Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and remove jammed one way bearing.
Motor mount consists of third bearing block to provide motor shaft support, successfully decrease torque induced shifts, and decrease equipment striping issue.
Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more streamlined design likewise permits easier disassembly.
Tail pitch system equipped with high precision bearing.
New lightened landing equipment assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, successfully decrease wind resistance during flight, offering the most direct and accurate control feel back to the pilot, and displays exhilarating 3D performance and inconceivable flight speed.
Innovative moving battery tray rails inserted into the 3K side frames, with trademarked spring filled latching system, enabling fast battery access in addition to battery protection.
Top installed motor base bringing the motor???s center of mass closer to rotating disc, improving 3D agility.
Utilizes highest spec CNC modue-1 helical main equipment, with highest load tolerance and lowest noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control effectiveness.
Brand new 600 class 12S high voltage brushless motor offering generous torque and power output, yet takes in lower average current to prolong the life of batteries.
High quality new tail transmission design, combined with new dual point installed tail pitch control assembly to decrease slops and increase rudder control precision.
Total pitch range of +15~-15 degrees, for the supreme 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point fast release installs.

3GX Programmable Flybarless System Includes:

3GX is presently the smallest and lightest flybarless system available on the market. Two ports to straight connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system
Illustrated guidelines on the computer setup software assists direct the user through a step by step setup procedure, enabling fast setups without omitting any steps
With 3GX's built in Align RCE-G600 governor function, no external governor is required to decrease electronic wire clutters
3GX utilizes brand new gyroscope sensing units of the highest specs when compared with other flybarless systems presently on the market, permitting it to be used under extreme conditions. Double axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared with last generation 3G. This is clearly obvious in stable hover in addition to extremely aerobatic regimens
The superior vibration resistant quality appears even when installed with more difficult double sided installing tape
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility
3GX's rudder enables consistent rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the best integration in between 3GX and helicopter.
Brand new revamped 3GX represents a brand-new generation of multi function flybarless system. The dramatically enhanced performance will produce instant impact on any enthusiasts.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in just a couple of minutes through a simple procedure. In addition, the 3GX can support all the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connection- With the quickly to be released Bluetooth connection package, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live adjustments to 3GX without powering down.
Custom parameters have been opened up in 3GX to enable pilots to fine tune various settings for the swashplate and rudder. The settings export feature enables custom settings to be shared amongst friends.
Suitable for helicopters of all class from 250 to 800, glow engine or electric powered.
With built in pirouette payment function, the 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with precision.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position in addition to altitude, and even autonomous way point flights in addition to return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Requirement servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)
Digital Pitch Gauge/Dial Pitch Gauge