Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Characteristics:

The frame utilizes 2mm carbon fiber plates of the greatest spec. Patented composite product building and construction strategy skillfully make use of frame area that enhanced general rigidness, as well as produced a minimalistic beauty.
Heatsink embedded into motor mount for efficient cooling of motor.
Utilize direct link CCPM swashplate control system to make it possible for direct and fast control action. Specially developed anodized CNC servo horns are not only visually pleasing, however are exceptionally rigid.
The most optimal motor pinion ratio and tail gear ratio to attain the most effective power output and flight characteristic.
Additional radial bearing is contributed to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
Motor mount includes third bearing block to offer motor shaft assistance, effectively minimize torque induced shifts, and reduce gear striping issue.
Brand brand-new CNC machined metal tail gear box, with thicker side plates to increase rigidness. The more streamlined style likewise permits easier disassembly.
Tail pitch mechanism equipped with high accuracy bearing.
New lightened landing gear assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, effectively minimize wind resistance throughout flight, providing the most direct and precise control feel back to the pilot, and shows exciting 3D efficiency and unimaginable flight speed.
Innovative sliding battery tray rails inserted into the 3K side frames, with trademarked spring loaded locking mechanism, permitting quick battery access in addition to battery protection.
Top installed motor base bringing the motor???s center of gravity more detailed to rotating disc, improving 3D agility.
Utilizes greatest spec CNC modue-1 helical primary gear, with greatest load tolerance and lowest noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
Brand brand-new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries.
High quality brand-new tail gearbox style, combined with brand-new double point installed tail pitch control assembly to reduce slops and increase rudder control precision.
Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point quick release mounts.

3GX Programmable Flybarless System Features:

3GX is presently the smallest and lightest flybarless system readily available on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, along with full assistance of Futaba's S-BUS system
Illustrated instructions on the computer system setup software application assists direct the user through an action by action setup procedure, permitting quick setups without leaving out any steps
With 3GX's built in Align RCE-G600 guv function, no external guv is required to minimize electronic wire mess
3GX utilizes brand brand-new gyroscope sensing units of the greatest requirements when compared to other flybarless systems presently on the marketplace, permitting it to be used under harsh conditions. Double axis plus rudder sensor significantly enhances swashplate and rudder correction accuracy compared to last generation 3G. This is clearly visible in stable hover in addition to highly aerobatic routines
The remarkable vibration resistant characteristic appears even when installed with harder double sided installing tape
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The outcome is a significant stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive dexterity
3GX's rudder allows consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilot of all ability levels to experience the ideal integration between 3GX and helicopter.
Brand brand-new upgraded 3GX represents a brand-new generation of multi function flybarless system. The significantly enhanced efficiency will create immediate effect on any enthusiasts.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in just a couple of minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connection- With the soon to be released Bluetooth connection kit, the 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live adjustments to 3GX without powering down.
Custom criteria have actually been opened up in 3GX to permit pilots to fine tune various settings for the swashplate and rudder. The settings export function allows custom settings to be shared among friends.
Suitable for helicopters of all class from 250 to 800, radiance engine or electrical powered.
With built in pirouette settlement function, the 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly accomplished with precision.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position in addition to altitude, as well as autonomous way point flights in addition to return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Standard servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge