Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Features:

The frame makes use of 2mm carbon fiber plates of the highest specification. Patented composite material construction strategy cleverly utilize frame area that improved total rigidness, and also produced a minimalistic beauty.
Heatsink embedded into motor install for efficient cooling of motor.
Utilize direct link CCPM swashplate control system to allow direct and quick control reaction. Specifically created anodized CNC servo horns are not just aesthetically pleasing, but are incredibly rigid.
The most ideal motor pinion ratio and tail equipment ratio to accomplish the most effective power output and flight characteristic.
Additional radial bearing is added to the one method bearing block to guarantee smooth rotation, and eliminate jammed one method bearing.
Motor install includes 3rd bearing block to provide motor shaft support, successfully reduce torque caused shifts, and decrease equipment striping issue.
Brand brand-new CNC machined metal tail gear box, with thicker side plates to increase rigidness. The more streamlined style also enables simpler disassembly.
Tail pitch system geared up with high precision bearing.
New lightened landing equipment assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, successfully reduce wind resistance during flight, supplying the most direct and exact control feel back to the pilot, and shows exciting 3D performance and unimaginable flight speed.
Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring filled latching system, permitting quick battery access in addition to battery protection.
Top mounted motor base bringing the motor???s center of mass better to rotating disc, enhancing 3D agility.
Utilizes highest spec CNC modue-1 helical main equipment, with highest load tolerance and most affordable noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder lockingand control effectiveness.
Brand brand-new 600 class 12S high voltage brushless motor supplying generous torque and power output, yet takes in lower average current to extend the life of batteries.
High quality brand-new tail gearbox style, combined with brand-new double point mounted tail pitch control assembly to decrease slops and increase rudder control precision.
Total pitch variety of +15~-15 degrees, for the ultimate 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point quick release installs.

3GX Programmable Flybarless System Features:

3GX is currently the tiniest and lightest flybarless system available on the market. Two ports to straight link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system
Illustrated guidelines on the computer setup software application helps direct the user through a step by step setup procedure, permitting quick setups without leaving out any actions
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire mess
3GX makes use of brand name brand-new gyroscope sensors of the highest specifications when compared with other flybarless systems currently on the market, allowing it to be utilized under severe conditions. Double axis plus rudder sensing unit dramatically improves swashplate and rudder correction precision compared with last generation 3G. This is clearly visible in steady hover in addition to highly aerobatic routines
The exceptional vibration resistant attribute appears even when mounted with harder double sided installing tape
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with an entirely re-written firmware. The result is a significant stability improvement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility
3GX's rudder permits consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all skill levels to experience the perfect combination in between 3GX and helicopter.
Brand brand-new upgraded 3GX represents a brand-new generation of multi function flybarless system. The dramatically improved performance will develop immediate influence on any enthusiasts.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in simply a couple of minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connection- With the quickly to be launched Bluetooth connection set, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps allowing live modifications to 3GX without powering down.
Custom parameters have actually been opened up in 3GX to allow pilots to fine tune many settings for the swashplate and rudder. The settings export function permits custom settings to be shared amongst friends.
Suitable for helicopters of all class from 250 to 800, glow engine or electric powered.
With built in pirouette compensation function, the 3GX is able to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position in addition to altitude, as well as autonomous method point flights in addition to return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Requirement servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge