Align T-Rex 600E DFC 3GX Electric Helicopter Super Combo

This is the Align T-Rex 600E DFC 3GX Super Combo.

T-Rex 600E Pro DFC Features:

The frame uses 2mm carbon fiber plates of the greatest spec. Patented composite material building strategy skillfully use frame area that improved total rigidity, as well as developed a minimalistic beauty.
Heatsink embedded into motor mount for effective cooling of motor.
Utilize direct link CCPM swashplate control system to make it possible for direct and fast control reaction. Specially developed anodized CNC servo horns are not just visually pleasing, but are very rigid.
The most optimum motor pinion ratio and tail gear ratio to attain the most effective power output and flight characteristic.
Additional radial bearing is added to the one way bearing block to make sure smooth rotation, and eliminate jammed one way bearing.
Motor mount includes third bearing block to provide motor shaft support, effectively decrease torque caused shifts, and minimize gear striping issue.
Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more structured style likewise enables simpler disassembly.
Tail pitch system geared up with high accuracy bearing.
New lightened landing gear assembly with lower center of gravity.
Equipped with the low CG DFC rotor head, effectively decrease wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits thrilling 3D efficiency and unimaginable flight speed.
Innovative moving battery tray rails imbedded into the 3K side frames, with patented spring packed locking system, permitting quick battery access along with battery protection.
Top installed motor base bringing the motor???s center of gravity better to rotating disc, enhancing 3D agility.
Utilizes greatest spec CNC modue-1 helical primary gear, with greatest load tolerance and least expensive noise.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower typical current to prolong the life of batteries.
High quality new tail transmission style, combined with new dual point installed tail pitch control assembly to minimize slops and increase rudder control precision.
Total pitch series of +15~-15 degrees, for the ultimate 3D explosive power.
High speed thrust bearings in tail blade grips.
High quality painted fiberglass canopy with 4-point quick release installs.

3GX Programmable Flybarless System Features:

3GX is currently the smallest and lightest flybarless system available on the marketplace. Two ports to straight link Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system
Illustrated directions on the computer setup software assists direct the user through an action by step setup process, permitting quick setups without leaving out any steps
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to decrease electronic wire mess
3GX uses brand name new gyroscope sensors of the greatest specifications when compared to other flybarless systems currently on the marketplace, allowing it to be used under extreme conditions. Dual axis plus rudder sensor drastically improves swashplate and rudder correction accuracy compared to last generation 3G. This is plainly visible in stable hover along with highly aerobatic routines
The exceptional vibration resistant quality is evident even when installed with harder double sided installing tape
3GX uses 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility
3GX's rudder permits consistent rudder feel even under high speed conditions. This exceptional control feel will permit pilot of all skill levels to experience the ideal integration between 3GX and helicopter.
Brand new upgraded 3GX represents a brand-new generation of multi function flybarless system. The drastically improved efficiency will create immediate impact on any enthusiasts.
Based on the 3G FL760 manual setup process, the 3GX can be setup in simply a few minutes through a simple process. In addition, the 3GX can support all the CCPM swashplate systems currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Supports Bluetooth connectivity- With the quickly to be released Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live adjustments to 3GX without powering down.
Custom parameters have been opened up in 3GX to permit pilots to fine tune many settings for the swashplate and rudder. The settings export function permits customized settings to be shared amongst friends.
Suitable for helicopters of all class from 250 to 800, radiance engine or electrical powered.
With built in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are easily achieved with precision.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position along with elevation, as well as autonomous way point flights along with return home.

Includes:
One T-Rex 600E Pro DFC with one 600 3G Carbon fiber blades set, one 600MX Brushless Motor(510KV), threeDS615 Standard servos, one DS655 Specialized servo, one 3GX Flybarless System, oneCastle ICE HV 80 Brushless ESC, and one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator

Requires:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh recommendation)
Digital Pitch Gauge/Dial Pitch Gauge