Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combination Kit. The T-Rex 600N V2 is equipped with a re-designed rotor head system with several modification holes, permitting the maker to be fine tuned for either high control resolution or high stability based on the requirements of the private pilot. Furthermore, the T-REX 600N V2 comes with a range of efficiency upgrade parts for a restored appearance and enhanced efficiency. Plus, this combo bundle consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of favorable and unfavorable deltas, numerous Bell and Hiller mixing ratios offered, in addition to different flybar ratio settings.
The head assembly allows pilots to gain from greater control resolution along with stability level, pleasing the requirement of both highly stable static categories along with precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
Additional radial bearing is contributed to the top of the main gear center to make sure stable rotation, and get rid of one method bearing jamming.
Re-designed unibody stainless-steel tail drive gear center install, for more exact tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in enhanced rudder control precision.
Re-designed tail transmission, with visually pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, minimizing engine load and improving cooling efficiency.
Large diameter clutch system with special setup approach for great balance, very little vibration, and effective power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H cross section formed electronic mounting platform for easy electronic mounting and protection.
Large capacity 440cc fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch supporting point uses 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization effect.
Light weight highly agile flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with principles from big helicopter competitors, for the very best static and dynamic flight performance.
GP900 Head Lock Gyro Includes:
Uses MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are small, highly trustworthy, and highly stable.
16 bit high processing speed CPU is utilized for ultra high resolution, resulting in greater rudder precision than previously possible, even on modern-day high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both wide and narrow band receivers.
Integrated RCE-G600 speed guv function, hence GP900 can offer speed guv function without extra electronics.
Suitable for all 200 to 700 size glow engine and electric helicopters
Greater vibration resistance than any other systems. Superior efficiency is achievable even with harder mounting foam tapes.
Support criterion setting through PC user interface, along with firmware updates.
Anti-torque compensation. Optimum tail locking achievable no matter if gyro is installed upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Requirements:

Operating Voltage: DC 3.5~8.4V

Current Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump