Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combination Kit. The T-Rex 600N V2 is equipped with a re-designed rotor head system with several modification holes, enabling the machine to be fine tuned for either high control resolution or high stability based upon the needs of the individual pilot. Furthermore, the T-REX 600N V2 comes with a variety of performance upgrade components for a restored appearance and improved performance. Plus, this combination bundle includes a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, various Bell and Hiller mixing ratios offered, together with numerous flybar ratio settings.
The head assembly allows pilots to gain from higher control resolution along with stability level, satisfying the need of both highly stable static categories along with accuracy aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is added to the top of the main equipment hub to make sure stable rotation, and eliminate one method bearing jamming.
Re-designed unibody stainless steel tail drive equipment center mount, for more exact tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
Re-designed tail gear box, with aesthetically pleasing product and improved maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, minimizing engine load and improving cooling efficiency.
Large size clutch system with unique installation method for excellent balance, minimal vibration, and effective power transfer.
Forward mounted rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder reaction and excellent tail locking ability.
Unique H sample formed electronic installing platform for simple electronic installing and protection.
Large capacity 440cc fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch supporting point uses 10mm one method bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight highly nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with ideas from large helicopter competitors, for the very best static and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, highly dependable, and highly stable.
16 bit high processing speed CPU is utilized for ultra high resolution, resulting in higher rudder accuracy than previously possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, standard receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electric helicopters
Higher vibration resistance than any other systems. Superior performance is possible even with more difficult installing foam tapes.
Support parameter setting through PC interface, along with firmware updates.
Anti-torque compensation. Ideal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Specs:

Running Voltage: DC 3.5~8.4V

Existing Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump