Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combo Package. The T-Rex 600N V2 is geared up with a re-designed rotor head system with multiple modification holes, permitting the device to be tweaked for either high control resolution or high stability based upon the needs of the private pilot. Furthermore, the T-REX 600N V2 features a range of performance upgrade parts for a restored look and improved performance. Plus, this combination plan includes a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and negative deltas, numerous Bell and Hiller blending ratios readily available, along with numerous flybar ratio settings.
The head assembly allows pilots to benefit from higher control resolution in addition to stability level, satisfying the need of both highly stable static categories in addition to precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
Additional radial bearing is added to the top of the primary gear hub to guarantee stable rotation, and eliminate one way bearing jamming.
Re-designed unibody stainless steel tail drive gear center mount, for more accurate tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal connectors, leading to improved rudder control precision.
Re-designed tail transmission, with aesthetically pleasing product and improved maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, minimizing engine load and enhancing cooling efficiency.
Large size clutch system with unique installation method for excellent balance, very little vibration, and efficient power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H random sample shaped electronic installing platform for simple electronic installing and protection.
Large capacity 440cc fuel tank for up to 10 minutes of severe 3D flights.
Starting and clutch supporting point makes use of 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Light weight highly nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Designed with concepts from big helicopter competitions, for the very best static and dynamic flight performance.
GP900 Head Lock Gyro Includes:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, highly dependable, and highly stable.
16 bit high processing speed CPU is utilized for ultra high resolution, leading to higher rudder precision than formerly possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without additional electronics.
Suitable for all 200 to 700 size glow engine and electrical helicopters
Greater vibration resistance than other systems. Superior performance is possible even with harder installing foam tapes.
Support specification setting through PC user interface, in addition to firmware updates.
Anti-torque compensation. Ideal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specs:

Operating Voltage: DC 3.5~8.4V

Existing Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump