Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Restricted Edition" Helicopter Combination Set. The T-Rex 600N V2 is geared up with a re-designed rotor head system with multiple adjustment holes, enabling the device to be tweaked for either high control resolution or high stability based upon the requirements of the private pilot. In addition, the T-REX 600N V2 includes a range of efficiency upgrade components for a restored appearance and enhanced efficiency. Plus, this combo package includes a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Features:
600 sized programmable head assembly with 3 sets of positive and negative deltas, many Bell and Hiller mixing ratios available, in addition to different flybar ratio settings.
The head assembly enables pilots to gain from greater control resolution along with stability level, satisfying the need of both extremely stable static categories along with accuracy aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary gear hub to make sure stable rotation, and eliminate one way bearing jamming.
Re-designed unibody stainless steel tail drive gear center install, for more accurate tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal ports, leading to enhanced rudder control precision.
Re-designed tail transmission, with aesthetically pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, minimizing engine load and improving cooling efficiency.
Large diameter clutch system with special installation approach for excellent balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking ability.
Unique H random sample shaped electronic mounting platform for simple electronic mounting and protection.
Large capability 440cc fuel tank for up to 10 minutes of extreme 3D flights.
Starting and clutch supporting point utilizes 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization effect.
Light weight extremely agile flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with ideas from large helicopter competitions, for the very best static and dynamic flight performance.
GP900 Head Lock Gyro Features:
Uses MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, extremely reliable, and extremely stable.
16 bit high processing speed CPU is used for ultra high resolution, leading to greater rudder accuracy than previously possible, even on contemporary high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed governor function, thus GP900 can supply speed governor function without additional electronics.
Suitable for all 200 to 700 size glow engine and electric helicopters
Higher vibration resistance than any other systems. Superior efficiency is possible even with more difficult mounting foam tapes.
Support criterion setting through PC interface, along with firmware updates.
Anti-torque settlement. Optimal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specs:

Operating Voltage: DC 3.5~8.4V

Current Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump