Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with multiple modification holes, enabling the maker to be fine tuned for either high control resolution or high stability based on the needs of the individual pilot. In addition, the T-REX 600N V2 features a range of performance upgrade components for a restored look and enhanced performance. Plus, this combo package includes a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of favorable and unfavorable deltas, many Bell and Hiller blending ratios readily available, along with various flybar ratio settings.
The head assembly allows pilots to take advantage of greater control resolution along with stability level, pleasing the requirement of both extremely stable fixed classifications along with precision aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary gear center to make sure stable rotation, and eliminate one way bearing jamming.
Re-designed unibody stainless steel tail drive gear center install, for more precise tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal adapters, leading to enhanced rudder control precision.
Re-designed tail gear box, with aesthetically pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, reducing engine load and improving cooling efficiency.
Large size clutch system with unique setup method for good balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and exceptional tail locking ability.
Unique H sample shaped electronic installing platform for easy electronic installing and protection.
Large capability 440cc fuel tank for up to 10 minutes of extreme 3D flights.
Starting and clutch supporting point uses 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with ideas from big helicopter competitors, for the very best fixed and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are small, extremely reliable, and extremely stable.
16 bit high processing speed CPU is used for ultra high resolution, leading to greater rudder precision than formerly possible, even on contemporary high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed guv function, thus GP900 can supply speed guv function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Greater vibration resistance than any other systems. Superior performance is achievable even with harder installing foam tapes.
Support parameter setting through PC user interface, along with firmware updates.
Anti-torque settlement. Optimal tail locking achievable no matter if gyro is mounted upright or inverted.
600N V2 Specifications:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specifications:

Running Voltage: DC 3.5~8.4V

Current Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump