Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Restricted Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with numerous modification holes, permitting the device to be fine tuned for either high control resolution or high stability based on the requirements of the private pilot. In addition, the T-REX 600N V2 includes a range of efficiency upgrade components for a renewed appearance and improved efficiency. Plus, this combination package consists of a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Features:
600 sized programmable head assembly with 3 sets of favorable and negative deltas, many Bell and Hiller blending ratios available, together with various flybar ratio settings.
The head assembly permits pilots to benefit from higher control resolution in addition to stability level, pleasing the requirement of both highly steady fixed categories in addition to accuracy aerobatic categories.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the main equipment hub to guarantee steady rotation, and remove one way bearing jamming.
Re-designed unibody stainless steel tail drive equipment center install, for more exact tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal adapters, leading to improved rudder control precision.
Re-designed tail gear box, with aesthetically pleasing material and improved maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, decreasing engine load and enhancing cooling efficiency.
Large size clutch system with unique installation method for good balance, very little vibration, and efficient power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder response and excellent tail locking ability.
Unique H cross section formed electronic mounting platform for simple electronic mounting and protection.
Large capability 440cc fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch supporting point uses 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight highly nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Created with principles from large helicopter competitors, for the very best fixed and dynamic flight performance.
GP900 Head Lock Gyro Features:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, highly reputable, and highly steady.
16 bit high processing speed CPU is used for ultra high resolution, leading to higher rudder accuracy than formerly possible, even on modern-day high powered helicopters.
Supports Spektrum and JR satellites, standard receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed governor function, hence GP900 can offer speed governor function without extra electronics.
Suitable for all 200 to 700 size glow engine and electric helicopters
Higher vibration resistance than any other systems. Superior efficiency is attainable even with more difficult mounting foam tapes.
Support criterion setting through PC user interface, in addition to firmware updates.
Anti-torque payment. Optimal tail locking attainable no matter if gyro is installed upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specs:

Operating Voltage: DC 3.5~8.4V

Current Usage: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump