Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Restricted Edition" Helicopter Combo Kit. The T-Rex 600N V2 is equipped with a re-designed rotor head system with multiple adjustment holes, enabling the machine to be fine tuned for either high control resolution or high stability based on the needs of the specific pilot. Furthermore, the T-REX 600N V2 comes with a range of efficiency upgrade parts for a renewed appearance and improved efficiency. Plus, this combination package consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, many Bell and Hiller blending ratios readily available, together with different flybar ratio settings.
The head assembly enables pilots to take advantage of greater control resolution as well as stability level, pleasing the need of both highly steady static categories as well as precision aerobatic categories.
Dual 3K carbon plate side frame design for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the primary gear hub to make sure steady rotation, and get rid of one method bearing jamming.
Re-designed unibody stainless steel tail drive gear center mount, for more precise tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal connectors, leading to improved rudder control precision.
Re-designed tail gear box, with aesthetically pleasing product and improved maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, lowering engine load and improving cooling efficiency.
Large diameter clutch system with special installation approach for good balance, minimal vibration, and effective power transfer.
Forward installed rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H random sample shaped electronic installing platform for easy electronic installing and protection.
Large capability 440cc fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch supporting point utilizes 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight highly agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with ideas from large helicopter competitors, for the very best static and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are little, highly trusted, and highly steady.
16 bit high processing speed CPU is used for ultra high resolution, leading to greater rudder precision than previously possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both wide and narrow band receivers.
Integrated RCE-G600 speed guv function, thus GP900 can supply speed guv function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Higher vibration resistance than other systems. Superior efficiency is possible even with more difficult installing foam tapes.
Support parameter setting through PC interface, as well as firmware updates.
Anti-torque payment. Optimum tail locking possible no matter if gyro is installed upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specs:

Operating Voltage: DC 3.5~8.4V

Existing Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump