Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combination Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with several modification holes, allowing the maker to be tweaked for either high control resolution or high stability based on the needs of the specific pilot. Additionally, the T-REX 600N V2 features a variety of efficiency upgrade elements for a restored look and enhanced efficiency. Plus, this combination package includes a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Features:
600 sized programmable head assembly with 3 sets of positive and negative deltas, various Bell and Hiller mixing ratios offered, together with various flybar ratio settings.
The head assembly enables pilots to gain from higher control resolution along with stability level, satisfying the requirement of both extremely stable static categories along with accuracy aerobatic categories.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is contributed to the top of the primary gear center to make sure stable rotation, and eliminate one way bearing jamming.
Re-designed unibody stainless-steel tail drive gear center mount, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal ports, resulting in enhanced rudder control precision.
Re-designed tail transmission, with aesthetically pleasing product and enhanced maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, reducing engine load and enhancing cooling efficiency.
Large diameter clutch system with distinct installation approach for good balance, very little vibration, and efficient power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking ability.
Unique H sample formed electronic installing platform for easy electronic installing and protection.
Large capability 440cc fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch supporting point uses 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Designed with principles from large helicopter competitors, for the best static and dynamic flight performance.
GP900 Head Lock Gyro Features:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are small, extremely reputable, and extremely stable.
16 bit high processing speed CPU is used for ultra high resolution, resulting in higher rudder accuracy than previously possible, even on modern-day high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both wide and narrow band receivers.
Integrated RCE-G600 speed guv function, thus GP900 can supply speed guv function without additional electronics.
Suitable for all 200 to 700 size glow engine and electrical helicopters
Greater vibration resistance than any other systems. Superior efficiency is possible even with more difficult installing foam tapes.
Support parameter setting through PC interface, along with firmware updates.
Anti-torque payment. Optimal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Requirements:

Operating Voltage: DC 3.5~8.4V

Current Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump