Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo Package. The T-Rex 600N V2 is equipped with a re-designed rotor head system with several adjustment holes, enabling the maker to be tweaked for either high control resolution or high stability based on the needs of the individual pilot. Furthermore, the T-REX 600N V2 comes with a variety of performance upgrade parts for a renewed look and improved performance. Plus, this combo package consists of a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Features:
600 sized programmable head assembly with 3 sets of positive and negative deltas, numerous Bell and Hiller blending ratios offered, along with various flybar ratio settings.
The head assembly enables pilots to benefit from greater control resolution along with stability level, pleasing the need of both extremely stable static categories along with accuracy aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary equipment hub to ensure stable rotation, and remove one method bearing jamming.
Re-designed unibody stainless-steel tail drive equipment center install, for more precise tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal adapters, resulting in improved rudder control precision.
Re-designed tail transmission, with visually pleasing material and improved maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, reducing engine load and improving cooling efficiency.
Large diameter clutch system with distinct setup method for good balance, minimal vibration, and effective power transfer.
Forward installed rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and outstanding tail locking ability.
Unique H random sample shaped electronic mounting platform for simple electronic mounting and protection.
Large capacity 440cc fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch supporting point utilizes 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with ideas from large helicopter competitions, for the best static and vibrant flight performance.
GP900 Head Lock Gyro Features:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are little, extremely dependable, and extremely stable.
16 bit high processing speed CPU is utilized for ultra high resolution, resulting in greater rudder accuracy than formerly possible, even on contemporary high powered helicopters.
Supports Spektrum and JR satellites, standard receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed guv function, therefore GP900 can offer speed guv function without additional electronics.
Suitable for all 200 to 700 size radiance engine and electric helicopters
Higher vibration resistance than other systems. Superior performance is attainable even with more difficult mounting foam tapes.
Support specification setting through PC user interface, along with firmware updates.
Anti-torque payment. Ideal tail locking attainable no matter if gyro is installed upright or inverted.
600N V2 Specifications:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specifications:

Running Voltage: DC 3.5~8.4V

Existing Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump