Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Restricted Edition" Helicopter Combination Package. The T-Rex 600N V2 is equipped with a re-designed rotor head system with multiple change holes, allowing the device to be tweaked for either high control resolution or high stability based on the needs of the private pilot. Additionally, the T-REX 600N V2 comes with a range of performance upgrade components for a renewed appearance and improved performance. Plus, this combination plan consists of a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and negative deltas, numerous Bell and Hiller blending ratios offered, along with various flybar ratio settings.
The head assembly permits pilots to gain from higher control resolution as well as stability level, pleasing the need of both highly stable static classifications as well as precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the main gear center to ensure stable rotation, and remove one method bearing jamming.
Re-designed unibody stainless-steel tail drive gear center install, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal ports, leading to improved rudder control precision.
Re-designed tail gear box, with aesthetically pleasing product and improved maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly efficient lightened engine cooling fan, lowering engine load and enhancing cooling efficiency.
Large diameter clutch system with special installation approach for great balance, very little vibration, and effective power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking ability.
Unique H cross section formed electronic installing platform for easy electronic installing and protection.
Large capability 440cc fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch supporting point makes use of 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight highly agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Designed with concepts from big helicopter competitions, for the very best static and dynamic flight performance.
GP900 Head Lock Gyro Includes:
Uses MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are little, highly dependable, and highly stable.
16 bit high processing speed CPU is used for ultra high resolution, leading to higher rudder precision than previously possible, even on modern-day high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both wide and narrow band receivers.
Integrated RCE-G600 speed guv function, hence GP900 can provide speed guv function without additional electronics.
Suitable for all 200 to 700 size radiance engine and electric helicopters
Greater vibration resistance than other systems. Superior performance is attainable even with more difficult installing foam tapes.
Support specification setting through PC interface, as well as firmware updates.
Anti-torque payment. Optimal tail locking attainable no matter if gyro is installed upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Requirements:

Operating Voltage: DC 3.5~8.4V

Existing Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump