Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combination Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with multiple modification holes, permitting the maker to be fine tuned for either high control resolution or high stability based upon the requirements of the individual pilot. Additionally, the T-REX 600N V2 includes a variety of performance upgrade components for a renewed appearance and improved performance. Plus, this combination plan consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Features:
600 sized programmable head assembly with 3 sets of positive and negative deltas, numerous Bell and Hiller blending ratios available, together with different flybar ratio settings.
The head assembly allows pilots to benefit from greater control resolution along with stability level, satisfying the requirement of both highly stable static classifications along with precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the primary gear center to ensure stable rotation, and remove one method bearing jamming.
Re-designed unibody stainless-steel tail drive gear center install, for more exact tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal ports, resulting in improved rudder control precision.
Re-designed tail transmission, with aesthetically pleasing material and improved maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, reducing engine load and enhancing cooling efficiency.
Large size clutch system with distinct setup method for great balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder reaction and outstanding tail locking ability.
Unique H cross section formed electronic mounting platform for simple electronic mounting and protection.
Large capacity 440cc fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch supporting point utilizes 10mm one method bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight highly nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Created with principles from large helicopter competitors, for the very best static and vibrant flight performance.
GP900 Head Lock Gyro Features:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are small, highly reputable, and highly stable.
16 bit high processing speed CPU is used for ultra high resolution, resulting in greater rudder precision than formerly possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed governor function, hence GP900 can provide speed governor function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Greater vibration resistance than other systems. Superior performance is attainable even with more difficult mounting foam tapes.
Support criterion setting through PC interface, along with firmware updates.
Anti-torque compensation. Optimum tail locking attainable no matter if gyro is mounted upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specs:

Running Voltage: DC 3.5~8.4V

Existing Usage: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump