Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combination Set. The T-Rex 600N V2 is geared up with a re-designed rotor head system with multiple change holes, allowing the maker to be tweaked for either high control resolution or high stability based on the requirements of the individual pilot. Additionally, the T-REX 600N V2 features a variety of performance upgrade parts for a renewed appearance and enhanced performance. Plus, this combination bundle consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of favorable and unfavorable deltas, various Bell and Hiller blending ratios readily available, in addition to different flybar ratio settings.
The head assembly allows pilots to gain from higher control resolution in addition to stability level, pleasing the need of both extremely stable static categories in addition to precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the main equipment center to make sure stable rotation, and get rid of one method bearing jamming.
Re-designed unibody stainless steel tail drive equipment center mount, for more exact tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, leading to enhanced rudder control precision.
Re-designed tail transmission, with aesthetically pleasing product and enhanced maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly efficient lightened engine cooling fan, minimizing engine load and enhancing cooling efficiency.
Large size clutch system with unique setup approach for excellent balance, minimal vibration, and effective power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H cross section formed electronic installing platform for simple electronic installing and protection.
Large capability 440cc fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch supporting point utilizes 10mm one method bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight extremely agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with concepts from big helicopter competitors, for the best static and dynamic flight performance.
GP900 Head Lock Gyro Includes:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are little, extremely trusted, and extremely stable.
16 bit high processing speed CPU is utilized for ultra high resolution, leading to higher rudder precision than previously possible, even on modern-day high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both wide and narrow band receivers.
Integrated RCE-G600 speed guv function, hence GP900 can supply speed guv function without additional electronics.
Suitable for all 200 to 700 size glow engine and electric helicopters
Greater vibration resistance than other systems. Superior performance is possible even with more difficult installing foam tapes.
Support specification setting through PC user interface, in addition to firmware updates.
Anti-torque compensation. Optimal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specifications:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Specifications:

Operating Voltage: DC 3.5~8.4V

Existing Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump