Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with numerous adjustment holes, enabling the device to be tweaked for either high control resolution or high stability based on the requirements of the specific pilot. In addition, the T-REX 600N V2 features a range of performance upgrade components for a restored look and improved performance. Plus, this combo bundle consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of favorable and negative deltas, various Bell and Hiller mixing ratios available, together with numerous flybar ratio settings.
The head assembly allows pilots to take advantage of higher control resolution in addition to stability level, pleasing the need of both extremely stable fixed classifications in addition to precision aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is added to the top of the main equipment hub to ensure stable rotation, and remove one way bearing jamming.
Re-designed unibody stainless-steel tail drive equipment center install, for more precise tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
Re-designed tail gear box, with aesthetically pleasing material and improved maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, lowering engine load and improving cooling efficiency.
Large diameter clutch system with special setup technique for great balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking ability.
Unique H random sample formed electronic installing platform for simple electronic installing and protection.
Large capacity 440cc fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch supporting point makes use of 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Developed with ideas from large helicopter competitors, for the best fixed and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Uses MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, extremely reliable, and extremely stable.
16 bit high processing speed CPU is used for ultra high resolution, resulting in higher rudder precision than previously possible, even on contemporary high powered helicopters.
Supports Spektrum and JR satellites, standard receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without additional electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Higher vibration resistance than other systems. Superior performance is possible even with harder installing foam tapes.
Support parameter setting through PC interface, in addition to firmware updates.
Anti-torque payment. Optimum tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specifications:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Specifications:

Operating Voltage: DC 3.5~8.4V

Present Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump