Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with numerous adjustment holes, allowing the machine to be fine tuned for either high control resolution or high stability based on the needs of the individual pilot. Furthermore, the T-REX 600N V2 features a variety of performance upgrade parts for a restored appearance and enhanced performance. Plus, this combination plan consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Features:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, various Bell and Hiller mixing ratios offered, in addition to different flybar ratio settings.
The head assembly permits pilots to take advantage of greater control resolution along with stability level, pleasing the requirement of both extremely steady static classifications along with accuracy aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is added to the top of the primary gear hub to ensure steady rotation, and get rid of one way bearing jamming.
Re-designed unibody stainless steel tail drive gear center install, for more accurate tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal ports, leading to enhanced rudder control precision.
Re-designed tail transmission, with aesthetically pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, minimizing engine load and enhancing cooling efficiency.
Large diameter clutch system with unique installation method for great balance, very little vibration, and effective power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H sample formed electronic installing platform for easy electronic installing and protection.
Large capacity 440cc fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch supporting point uses 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight extremely agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with ideas from large helicopter competitors, for the best static and dynamic flight performance.
GP900 Head Lock Gyro Features:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, extremely trusted, and extremely steady.
16 bit high processing speed CPU is used for ultra high resolution, leading to greater rudder accuracy than formerly possible, even on modern-day high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed guv function, thus GP900 can provide speed guv function without extra electronics.
Suitable for all 200 to 700 size glow engine and electric helicopters
Greater vibration resistance than other systems. Superior performance is attainable even with more difficult installing foam tapes.
Support parameter setting through PC interface, along with firmware updates.
Anti-torque payment. Optimum tail locking attainable no matter if gyro is installed upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Requirements:

Running Voltage: DC 3.5~8.4V

Existing Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump