Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo Package. The T-Rex 600N V2 is geared up with a re-designed rotor head system with several modification holes, enabling the machine to be fine tuned for either high control resolution or high stability based on the requirements of the individual pilot. Additionally, the T-REX 600N V2 includes a range of performance upgrade elements for a restored appearance and improved performance. Plus, this combo plan consists of a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, many Bell and Hiller blending ratios available, together with various flybar ratio settings.
The head assembly permits pilots to benefit from greater control resolution in addition to stability level, pleasing the need of both highly stable static categories in addition to accuracy aerobatic categories.
Dual 3K carbon plate side frame design for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the main equipment center to ensure stable rotation, and get rid of one method bearing jamming.
Re-designed unibody stainless steel tail drive equipment center mount, for more precise tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
Re-designed tail transmission, with visually pleasing material and improved maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, decreasing engine load and enhancing cooling efficiency.
Large size clutch system with special setup technique for great balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking ability.
Unique H random sample formed electronic installing platform for simple electronic installing and protection.
Large capability 440cc fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch supporting point uses 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization effect.
Light weight highly agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Designed with concepts from big helicopter competitions, for the very best static and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, highly reputable, and highly stable.
16 bit high processing speed CPU is utilized for ultra high resolution, resulting in greater rudder accuracy than formerly possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed governor function, hence GP900 can supply speed governor function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Greater vibration resistance than any other systems. Superior performance is possible even with harder installing foam tapes.
Support parameter setting through PC user interface, in addition to firmware updates.
Anti-torque compensation. Optimum tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Requirements:

Running Voltage: DC 3.5~8.4V

Existing Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump