Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Minimal Edition" Helicopter Combination Package. The T-Rex 600N V2 is geared up with a re-designed rotor head system with multiple change holes, permitting the machine to be tweaked for either high control resolution or high stability based on the needs of the private pilot. Furthermore, the T-REX 600N V2 includes a range of performance upgrade elements for a restored look and enhanced performance. Plus, this combo plan consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, numerous Bell and Hiller mixing ratios readily available, along with different flybar ratio settings.
The head assembly enables pilots to benefit from higher control resolution as well as stability level, pleasing the requirement of both highly steady fixed categories as well as precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
Additional radial bearing is added to the top of the main equipment hub to make sure steady rotation, and remove one way bearing jamming.
Re-designed unibody stainless-steel tail drive equipment center install, for more exact tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, leading to enhanced rudder control precision.
Re-designed tail transmission, with aesthetically pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly efficient lightened engine cooling fan, lowering engine load and enhancing cooling efficiency.
Large size clutch system with distinct installation approach for good balance, very little vibration, and reliable power transfer.
Forward installed rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H random sample formed electronic installing platform for easy electronic installing and protection.
Large capability 440cc fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch supporting point uses 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight highly agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with principles from large helicopter competitions, for the very best fixed and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are little, highly reputable, and highly steady.
16 bit high processing speed CPU is utilized for ultra high resolution, leading to higher rudder precision than previously possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed guv function, therefore GP900 can offer speed guv function without additional electronics.
Suitable for all 200 to 700 size glow engine and electrical helicopters
Higher vibration resistance than any other systems. Superior performance is achievable even with more difficult installing foam tapes.
Support criterion setting through PC user interface, as well as firmware updates.
Anti-torque settlement. Optimum tail locking achievable no matter if gyro is installed upright or inverted.
600N V2 Specifications:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specifications:

Running Voltage: DC 3.5~8.4V

Existing Consumption: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump