Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Restricted Edition" Helicopter Combo Set. The T-Rex 600N V2 is equipped with a re-designed rotor head system with multiple modification holes, enabling the device to be fine tuned for either high control resolution or high stability based on the needs of the individual pilot. Additionally, the T-REX 600N V2 comes with a range of performance upgrade components for a renewed appearance and improved performance. Plus, this combo bundle consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Features:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, many Bell and Hiller mixing ratios readily available, along with different flybar ratio settings.
The head assembly allows pilots to benefit from higher control resolution in addition to stability level, pleasing the requirement of both extremely stable fixed classifications in addition to precision aerobatic categories.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is contributed to the top of the main gear hub to ensure stable rotation, and remove one method bearing jamming.
Re-designed unibody stainless steel tail drive gear center install, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal ports, leading to improved rudder control precision.
Re-designed tail transmission, with aesthetically pleasing product and improved maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, decreasing engine load and enhancing cooling efficiency.
Large size clutch system with special installation method for good balance, minimal vibration, and reliable power transfer.
Forward installed rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and exceptional tail locking ability.
Unique H random sample shaped electronic installing platform for easy electronic installing and protection.
Large capability 440cc fuel tank for up to 10 minutes of extreme 3D flights.
Starting and clutch supporting point utilizes 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Developed with principles from big helicopter competitors, for the best fixed and dynamic flight performance.
GP900 Head Lock Gyro Features:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, extremely reputable, and extremely stable.
16 bit high processing speed CPU is used for ultra high resolution, leading to higher rudder precision than previously possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed guv function, thus GP900 can supply speed guv function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Greater vibration resistance than any other systems. Superior performance is achievable even with harder installing foam tapes.
Support specification setting through PC user interface, in addition to firmware updates.
Anti-torque payment. Optimum tail locking achievable no matter if gyro is installed upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Requirements:

Operating Voltage: DC 3.5~8.4V

Existing Usage: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump