Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combination Set. The T-Rex 600N V2 is equipped with a re-designed rotor head system with several modification holes, permitting the device to be fine tuned for either high control resolution or high stability based upon the requirements of the private pilot. Furthermore, the T-REX 600N V2 includes a range of efficiency upgrade elements for a renewed look and improved efficiency. Plus, this combination bundle consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, numerous Bell and Hiller mixing ratios offered, along with numerous flybar ratio settings.
The head assembly enables pilots to take advantage of greater control resolution in addition to stability level, pleasing the requirement of both highly stable fixed classifications in addition to accuracy aerobatic categories.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
Additional radial bearing is added to the top of the primary gear hub to make sure stable rotation, and remove one way bearing jamming.
Re-designed unibody stainless-steel tail drive gear center mount, for more precise tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal adapters, resulting in improved rudder control precision.
Re-designed tail gear box, with visually pleasing product and improved maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly efficient lightened engine cooling fan, minimizing engine load and enhancing cooling efficiency.
Large size clutch system with unique setup approach for good balance, minimal vibration, and efficient power transfer.
Forward installed rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder reaction and outstanding tail locking ability.
Unique H random sample shaped electronic installing platform for simple electronic installing and protection.
Large capability 440cc fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch supporting point utilizes 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization effect.
Light weight highly agile flybar system.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
Created with ideas from large helicopter competitions, for the best fixed and dynamic flight performance.
GP900 Head Lock Gyro Includes:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, highly trustworthy, and highly stable.
16 bit high processing speed CPU is used for ultra high resolution, resulting in greater rudder accuracy than previously possible, even on contemporary high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both broad and narrow band receivers.
Integrated RCE-G600 speed guv function, therefore GP900 can supply speed guv function without extra electronics.
Suitable for all 200 to 700 size glow engine and electric helicopters
Greater vibration resistance than other systems. Superior efficiency is possible even with more difficult installing foam tapes.
Support specification setting through PC user interface, in addition to firmware updates.
Anti-torque settlement. Ideal tail locking possible no matter if gyro is installed upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Specs:

Operating Voltage: DC 3.5~8.4V

Present Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump