Align T-Rex 600 Nitro V2 Limited w/Servos/Gyro/Battery

The Align T-REX 600N V2 includes newly styled performance upgrade components for a restored look.

Features:

• New 600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, numerous Bell and Hiller mixing ratios available, together with numerous flybar ratio settings.
• The new head assembly allow pilots to gain from the head's greater control resolution in addition to stability level, pleasing the need of both extremely stable static categories in addition to precision aerobatic categories.
• Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
• Additional radial bearing is contributed to the top of the main gear hub to make sure stable rotation, and remove jamming of one way bearing.
• Newly developed unibody stainless steel tail drive gear center install, for more precise tail drive gear and greater tolerance.
• New high quality carbon rudder control rod assembly using 5mm carbon rod and metal adapters, leading to improved rudder control precision.
• Brand new tail transmission, with aesthetically pleasing material and improved maintenance.
• Utilizes high effective tail drive system.
• High speed ranked thrust bearing in tail blade grips.
• Highly effective lightened engine cooling fan, decreasing engine load and improving cooling efficiency.
• Large size clutch system with unique installation technique for good balance, very little vibration, and efficient power transfer.
• Forward mounted rudder servo to safeguard it from exhaust contamination.
• mm tail blades for sharp rudder action and excellent tail locking ability.
• Unique H random sample shaped electronic installing platform for easy electronic installing and protection.
• Large capability 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
• Starting and clutch supporting point uses 10mm one way bearing.
• All up prepared to fly dry weight is only 3200g (7lbs).
• Main fuel tank developed with fuel supply stabilization effect.
• Light weight extremely nimble flybar system.
• Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
• Created with concepts from large helicopter competitions, for the best static and vibrant flight performance.

Users should have a specific principle of security to run the R/C helicopters. Be sure to check out and adhere to related security notes of instruction manual prior to flying.

This package consists of:
T-REX 600 Nitro V2 kits set
600D PRO Carbon fiber blade
(3) DS610 Digital servo
DS620 Digital servo
GP780 Head lock gyro combination
2 In 1 voltage regulator combination
RCE-G600 Guv

Needs:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Basic servo
Line up 50 engine
50 Muffler
Pitch gauge
Super starter
Engine fuel
Fuel pump

Specs:

Length: 1160mm
Height: 398mm
Main blade length: 600mm
Main rotor size: 1350mm
Tail rotor size: 240mm
Engine pinion gear: 20T
Autorotation tail drive gear: 180T
Drive gear ratio: 8.5:1:4.5(E:M:T)
Flying weight: Approximate. 3200g
Color container: 72x25.7x12.5cm
Outer container: 74.5x52.5x39.5cm ,6sets/ctn