Align T-Rex 600 Nitro V2 Limited w/Servos/Gyro/Battery

The Align T-REX 600N V2 comes with newly styled performance upgrade parts for a restored look.

Features:

• New 600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, numerous Bell and Hiller blending ratios available, along with different flybar ratio settings.
• The brand-new head assembly permit pilots to gain from the head's higher control resolution along with stability level, satisfying the requirement of both extremely stable static categories along with precision aerobatic categories.
• Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque caused flex.
• Additional radial bearing is contributed to the top of the main gear center to make sure stable rotation, and remove jamming of one way bearing.
• Newly created unibody stainless steel tail drive gear center install, for more exact tail drive gear and higher tolerance.
• New high quality carbon rudder control rod assembly using 5mm carbon rod and metal ports, leading to improved rudder control precision.
• Brand brand-new tail transmission, with visually pleasing material and improved maintenance.
• Utilizes high efficient tail drive system.
• High speed rated thrust bearing in tail blade grips.
• Highly efficient lightened engine cooling fan, lowering engine load and improving cooling efficiency.
• Large size clutch system with unique setup approach for excellent balance, very little vibration, and efficient power transfer.
• Forward installed rudder servo to safeguard it from exhaust contamination.
• mm tail blades for sharp rudder action and excellent tail locking ability.
• Unique H sample formed electronic mounting platform for simple electronic mounting and protection.
• Large capacity 440CC fuel tank for as much as 10 minutes of severe 3D flights.
• Starting and clutch supporting point uses 10mm one way bearing.
• All up ready to fly dry weight is only 3200g (7lbs).
• Main fuel tank created with fuel supply stabilization effect.
• Light weight extremely agile flybar system.
• Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
• Created with ideas from big helicopter competitions, for the very best static and vibrant flight performance.

Users must have a certain idea of security to operate the R/C helicopters. Make sure to check out and comply with related safety notes of user's manual prior to flying.

This plan consists of:
T-REX 600 Nitro V2 packages set
600D PRO Carbon fiber blade
(3) DS610 Digital servo
DS620 Digital servo
GP780 Head lock gyro combo
2 In 1 voltage regulator combo
RCE-G600 Guv

Needs:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Standard servo
Line up 50 engine
50 Muffler
Pitch gauge
Super starter
Engine fuel
Fuel pump

Specs:

Length: 1160mm
Height: 398mm
Main blade length: 600mm
Main rotor size: 1350mm
Tail rotor size: 240mm
Engine pinion gear: 20T
Autorotation tail drive gear: 180T
Own gear ratio: 8.5:1:4.5(E:M:T)
Flying weight: Approx. 3200g
Color carton: 72x25.7x12.5cm
External carton: 74.5x52.5x39.5cm ,6sets/ctn